Журналы →  Gornyi Zhurnal →  2022 →  №9 →  Назад

EQUIPMENT AND MATERIALS
Название System analysis of internal and external impacts on overhaul repair frequency of vertical split casing pumps
DOI 10.17580/gzh.2022.09.13
Автор Ovchinnikov N. P.
Информация об авторе

Mining Institute, Ammosov North-Eastern Federal University, Yakutsk, Russia:

N. P. Ovchinnikov, Director, Candidate of Engineering Sciences, ovchinnlar1986@mail.ru

Реферат

ALROSA is currently starting transition from surface to underground mining of kimberlite pipes. Underground mining promotes with various-nature rushes of water in underground openings. These inflows of water are finally collected in drain sumps of the main water-removal plant, and then are pumped out to ground surface by vertical split casing pumps. The practice shows that frequent overhaul repairs are typical of the domestic-manufacture split casing pumps operated in underground kimberlite mines. The overhaul repair frequency of the vertical split casing pumps is largely governed by the radial clearance between the inside faces of the gasket rings and the outside surfaces of the seal bands of the impellers. It is found that the dominant impact on the multifactor damage pattern of impeller sealers in vertical split casing pumps operated in underground kimberlite mines in Russia is exerted by hydro-abrasive wear, especially at the sites of corrosive filming. The integrated research finds out that the average service life between the overhaul repairs of the vertical split casing pumps in use in the underground kimberlite mines in Russia greatly depends on such external and internal impacts as the pump head, error-free running time of the balancing ring and concentration of mechanical impurities in mine water. The implemented regression analysis has yielded a prognostic model which allows a sufficiently reliable perspective forecast of average service life of the vertical split casing pumps between overhaul repairs for the underground kimberlite mines in Yakutia.

Ключевые слова Underground kimberlite mine, vertical split casing pump, wear, repair, mechanical impurities, pressure head
Библиографический список

1. ALROSA to renovate maintenance and repair system at all mining and processing integrated plants. ALROSA (PAO). Available at: https://alrosa.ru/press-center/news/2020/alrosa-obnovitsistemu-tekhnicheskogo-obsluzhivaniya-i-remontov-vsekh-gokov/?sphrase_id=1115 (accessed: 02.06.2022).
2. Ovchinnikov N. P. Problems of operation of electric pumping sectional type units on kimberlite mines of Alrosa and the ways of their solution. Izvestiya Tomskogo politekhnicheskogo universiteta. Inzhiniring georesursov. 2020. Vol. 329, No. 6. pp. 66–73.
3. Timokhin Yu. V., Palamarchuk T. N. The research results of the axial forces of the rotor and automatic settings. Donetsk Railway Transport Institute’s Transactions. Donetsk, 2017. No. 45. pp. 32–42.
4. Sosnovskiy S. V., Selkin V. P. Effect of transfer medium on wear rate of groove seals of centrifugal pumps. Journal of Friction and Wear. 2013. Vol. 34, No. 2. pp. 134–136.
5. Dolganov A. V. The influence of hydro-abrasive depreciation of excretory elements on exploitation qualities of rotary pumps at copper and pyrites pits. GIAB. 2015. No. 8. pp. 181–186.
6. Ostrovskiy V. G., Peshcherenko S. N. Calculations of the rate hydroabrasive wear interstage seal oil pump. Vestnik PNIPU. Geologiya. Neftegazovoe i gornoe delo. 2012. Vol. 11, No. 5. pp. 70–75.
7. Patel M., Kumar A., Pardhi B., Pal M. Abrasive, Erosive and Corrosive Wear in Slurry Pumps – A Review. International Research Journal of Engineering and Technology. 2020. Vol. 7, Iss. 3. pp. 2188–2195.
8. Shen Z., Li R., Han W., Quan H., Guo R. Erosion Wear on Impeller of Double-Suction Centrifugal Pump due to Sediment Flow. Journal of Applied Fluid Mechanics. 2020. Vol. 13, No. 4. pp. 1131–1142.
9. Zhengjing Shen, Wuli Chu, Xiangjun Li, Wei Dong. Sediment erosion in the impeller of a doublesuction centrifugal pump – A case st udy of the Jingtai Yellow River Irrigation Project, China. Wear. 2019. Vol. 422-423. pp. 269–279.
10. Serrano R. O. P., Santos L. P., de Faria Viana E. M., Pinto M. A., Martinez C. B. Case study: Effects of sediment concentration on the wear of fluvial water pump impellers on Brazil’s Acre River. Wear. 2018. Vol. 408-409. pp. 131–137.
11. Palamarchuk N. V., Timokhina V. Yu., Palamarchuk T. N. Causes of unsatisfactory operation of the automatic balancing devices of centrifugal high-pressure pumps. Donetsk Railway Transport Institute’s Transactions. Donetsk, 2016. No. 42. pp. 65–71.
12. Ovchinnikov N. P., Zyryanov I. V. Assessment of durability of sectional pumps in underground kimberlite mines of ALROSA. Gornyi Zhurnal. 2017. No. 10. pp. 41–44. DOI: 10.17580/gzh.2017.10.08
13. Drozdov A. V., Kramskov N. P., Genzel G. N. Features of hydrogeomechanical monitoring under water bodies at diamond deposits of Western Yakutia. Vestnik Irkutskogo gosudarstvennogo tekhnicheskogo universiteta. 2011. No. 1(48). pp. 72–79.
14. Ovchinnikov N. P. About slurry pumps impellers service life at concentrating plants of ALROSA JSC. Obogashchenie Rud. 2018. No. 4. pp. 51–54. DOI: 10.17580/or.2018.04.10
15. Primakin A. I., Bolshakova L. V. Method of expert estimations in the decision of problems of maintenance of economic safety of the managing subject. Vestnik Sankt-Peterburgskogo universiteta MVD Rossii. 2012. No. 1(53). pp. 191–200.
16. Rud Yu. S., Drabina N. V. Statistical evaluation of reliability indicators for ground pump housings 8 Gr 350/40 using the Statistica 6.0 program. GIAB. 2006. No. 2. pp. 303–309.

Language of full-text русский
Полный текст статьи Получить
Назад