SECONDARY RAW MATERIAL PROCESSING | |
ArticleName | A study on the influence of the graphite flakes disintegration method on their dispersed composition, particle shape, and flotation performance |
DOI | 10.17580/or.2022.06.08 |
ArticleAuthor | Orekhova N. N., Fadeeva N. V., Kolodezhnaya E. V., Efimova Yu. Yu. |
ArticleAuthorData | Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia): Orekhova N. N., Professor, Doctor of Engineering Sciences, Associate Professor, n_orehova@mail.ru Kolodezhnaya E. V., Leading Researcher, Candidate of Engineering Sciences, kev@uralomega.ru |
Abstract | Cast iron cooling generates iron-graphite flakes that may serve as a source of flaked graphite, a valuable material, in high demand by Russian manufacturers. This study was aimed at analyzing the changes in the dispersed composition and shape of iron-graphite flake dust particles when ground under various conditions. The grinding equipment comprised ball mills with metal and porcelain grinding media and a centrifugal impact grinding unit (a vertical shaft mill) with dynamic particle classification. The sieve analysis method and a laser particle size analyzer were used to study dispersion of the initial dust and its grinding products. The material composition and changes in the shapes of flake particles were studied using optical geometry analysis methods and scanning electron microscopy (SEM). Varying distributions of particles by size classes and grain agglomeration probability rates have been established for different grinding methods. The influence of the grinding method on the redistribution of magnetic particles is shown. It has been established that centrifugal milling of graphite flakes intensifies particle aggregation, but also contributes to higher performance in flotation separation as compared to ball milling. The following has been observed for centrifugal milling vs. ball milling: an increase in the yield by 3 %; higher mass fractions of carbon in fine and coarse product flotation concentrates by 22.7 and 17.5 %, respectively; and a 5 times lower concentration of the magnetic fraction. |
keywords | Iron-graphite flakes, graphite, particle-size distribution, X-ray spectral microanalysis, material composition, flotation, carbon content, magnetic particles |
References | 1. Spherical graphite. URL: http://www.sungraf.net/newsshow-133-186-1.html (accessed: 23.11.2022). 15. Fadeeva N. V., Orekhova N. N., Gorlova O. E. Study of the features of the material composition and technological properties of metallurgical graphite-containing dust for the production of flake graphite. Aktualnye Problemy Gornogo Dela. 2021. No. 3. pp. 20–27. |
Language of full-text | russian |
Full content | Buy |