Журналы →  Non-ferrous Мetals →  2022 →  №2 →  Назад

MATERIALS SCIENCE
Название Influence of silver nanoparticles on the structure and mechanical properties of porous titanium nickelide alloys
DOI 10.17580/nfm.2022.02.13
Автор Marchenko E. S., Baigonakova G. A., Larikov V. A., Monogenov A. N.
Информация об авторе

National Research Tomsk State University, Tomsk, Russia:

E. S. Marchenko, Doctor of Physical and Mathematical Sciences, Associate Professor, Head of the Laboratory of Medical Alloys and Shape Memory Implants, e-mail: 89138641814@mail.ru
G. A. Baigonakova, Candidate of Physical and Mathematical Sciences, Assistant, Senior Researcher, gat27@mail.ru
V. A. Larikov, Post-Graduate Student, Research Engineer, e-mail: calibra1995se@gmail.com
A. N. Monogenov, Candidate of Physical and Mathematical Sciences, Senior Researcher, Research Engineer

Реферат

The aim of the work is to study the effect of silver doping on the structure and mechanical properties of porous titanium nickelide alloys obtained by self-propagating high-temperature synthesis (SHS). The structure of the samples was studied using X-ray diffraction analysis, scanning and transmission electron microscopy. The mechanical properties of porous alloys were studied in compression tests. An increase in the volume fraction of the B19’ martensitic phase, intermetallic compounds based on the Ti2Ni and a decrease in the volume fraction of austenite with the B2 structure with an increase in the silver content were established. An increase in the plasticity of porous titanium nickelide alloys with an increase in the concentration of silver in the composition while maintaining the ultimate strength was revealed.

The research was carried out with financial support of the Russian Science Foundation under the Grant No. 22-72-10037, https://rscf.ru/project/22-72-10037/.

Ключевые слова Porous titanium nickelide, silver nanoparticles, self-propagating high-temperature synthesis, microstructure, phase composition, mechanical properties
Библиографический список

1. Otsuka K., Ren X. Physical Metallurgy of Ti -Ni-Based Shape Memory Alloys. Progress in Materials Science. 2005. Vol. 50, Iss. 5. pp. 511–678.
2. Eggeler G., Hornbogen E., Yawny A., Heckmann A., Wagner M. Structural and Functional Fatigue of NiTi Shape Memory Alloys. Materials Science and Engineering: A. 2004. Vol. 378, Iss. 1-2. pp. 24–33.
3. Monogenov A. N., Marchenko E. S., Baigonakova G. A., Yasenchuk Yu. F., Garin A. S., Volinsky A. А. Improved Mechanical Properties of Porous Nitinol by Aluminum Alloying. Journal of Alloys and Compounds. 2022. Vol. 918. 165617.
4. Baigonakova G. A., Marchenko E. S., Chekalkin T. L., Kang J., Weiss S., Obrosov A. Influence of Silver Addition on Structure, Martensite Transformations and Mechanical Properties of TiNiAg Alloy Wires for Biomedical Application. Materials. 2020. Vol. 13, Iss. 21. 4721.
5. Marchenko E. S., Baigonakova G. A., Gunther V. E. Effect of Alloying of Titanium Nickelide-Based Alloys with Group V Elements (Vanadium, Niobium) on Their Mechanical Properties. Russian Metallurgy (Metally). 2018. Iss. 10. pp. 990–994.
6. Hornbogen E. Microstructure and Thermo-Mechanical Properties of NiTi Shape Memory Alloys. Materials Science Forum. 2004. Vol. 455-456. pp. 335–341.
7. Shen J.-J., Lu N.-H., Chen C.-H. Mechanical and Elastocaloric Effect of Aged Ni-Rich TiNi Shape Memory Alloy Under Load-Controlled Deformation. Materials Science and Engineering: A. 2020. Vol. 788. 139554.
8. Pratten J., Nazhat S., Blaker J., Boccaccini A. In Vitro Attachment of Staphylococcus Epidermidis to Surgical Sutures with and Without Ag-Containing Bioactive Glass Coating. Journal of Biomaterials Applications. 2004. Vol. 19, Iss. 1. pp. 47–57.
9. Chambers C., Proctor C., Kabler P. Bactericidal Effects of Low Concentrations of Silver. Journal – American Water Works Association. 1962. Vol. 54, Iss. 2. pp. 208–216.
10. Zheng Y., Zhang B., Wang B., Wang Y., Li L., Yang Q., Cui L. Introduction of Antibacterial Function into Biomedical TiNi Shape Memory Alloy by the Addition of Element Ag. Acta Biomaterialia. 2011, Vol. 7, Iss. 6. 2758–2767.
11. Oh K.-T., Joo U.-H., Park G.-H., Hwang C.-J., Kim K.-N. Effect of Silver Addition on the Properties of Nickel-Titanium Alloys for Dental Application. Journal of Biomedical Materials Research Part B: Applied Biomaterials. 2006. Vol. 76B, Iss. 2. pp. 306–314.
12. Li S., Kim Y.-W., Nam T.-H. Transformation Behavior and Superelastic Properties of Ti – Ni – Ag Scaffolds Prepared by Sintering of Alloy Fibers. Scripta Materialia. 2018. Vol. 153, pp. 23–26.
13. Momeni S., Tillmann W. Influence of Ag on Antibacterial Performance, Microstructure and Phase Transformation of NiTi Shape Memory Alloy Coatings. Vacuum. 2019. Vol. 164. pp. 242–245.
14. Jhou W.-T., Wang C., Ii S., Chiang H.-S., Hsueh C.-H. TiNiCuAg Shape Memory Alloy Films for Biomedical Applications. Journal of Alloys and Compounds. 2018. Vol. 738. pp. 336–344.
15. Gilberto H. T., da Silva Á., Otubo J. Designing NiTiAg Shape Memory Alloys by Vacuum Arc Remelting: First Practical Insights on Melting and Casting. Shape Memory and Superelasticity. 2018. Vol. 4, Iss. 4. 402–410.
16. Marchenko E. S., Baigonakova G., Gyunter V. E. The Effect of Silver Doping on the Structure and Shape Memory Effect in Biocompatible TiNi Alloys. Technical Physics Letters. 2018. Vol. 44, Iss. 8. 749–752.
17. Chun S.-J., Noh J.-P., Yeom J.-T., Kim J.-I., Nam T.-H. Martensitic Transformation Behavior of Ti–Ni–Ag Alloys. Intermetallics. 2014. Vol. 46. pp. 91–96.
18. Li S., Kim E.-S., Kim Y.-W., Nam T.-H. Microstructures and Martensitic Transformation Behavior of Superelastic Ti –Ni – Ag Scaffolds. Materials Research Bulletin. 2016. Vol. 82. pp. 39–44.
19. Jang J.-Y., Chun S.-J., Kim N.-S., Cho J.-W., Kim J.-H., Yeom J.-T., Nam T.-H., Kim J.-I. Martensitic Transformation Behavior in Ti – Ni – X (Ag, In, Sn, Sb, Te, Tl, Pb, Bi) Ternary Alloys. Materials Research Bulletin. 2013. Vol. 48, Iss. 12. pp. 5064–5069.
20. Yi X., Pang G., Sun B., Meng X., Cai W. The Microstructure and Martensitic Transformation Behaviors in Ti – Ni – Hf – X (Ag, Sn) High Temperature Shape Memory Alloys. Journal of Alloys and Compounds. 2018. Vol. 756. pp. 19–25.
21. Zamponi C., Wuttig M., Quandt E. Ni–Ti–Ag Shape Memory Thin Films. Scripta Materialia. 2007. Vol. 56, Iss. 12. pp. 1075–1077.
22. Marchenko E. S., Baigonakova G. A., Kokorev O. V., Klopotov A. A., Iuzhakov M. M. Phase Equilibrium, Structure, Mechanical and Biocompatible Properties of TiNi-Based Alloy with Silver. Materials Research Express. 2019. Vol. 6, Iss. 6. 066559.
23. Thangavel E., Dhandapani V. S., Dharmalingam K., Marimuthu M., Veerapandian M., Arumugam M. K., Kim S.,
Kim B., Ramasundaram S., Kim D.-E. RF Magnetron Sputtering Mediated NiTi/Ag Coating on Ti-Alloy Substrate with Enhanced Biocompatibility and Durability. Materials Science and Engineering: C. 2019. Vol. 99. pp. 304–314.

Полный текст статьи Influence of silver nanoparticles on the structure and mechanical properties of porous titanium nickelide alloys
Назад