Journals →  Eurasian mining →  2022 →  #2 →  Back

EQUIPMENT AND MATERIALS
ArticleName Performance of diamond circular saws with innovative Fe-based binders
DOI 10.17580/em.2022.02.15
ArticleAuthor Loginov P. A., Avdeenko E. N., Manakova O. S., Levashov E. A.
ArticleAuthorData

National University of Science and Technology—NUST MISIS, Moscow, Russia:

Loginov P. A., Senior Researcher, Candidate of Engineering Sciences, pavel.loginov.misis@list.ru
Avdeenko E. N., Researcher, Candidate of Engineering Sciences
Manakova O. S., Head of Laboratory, Candidate of Engineering Sciences
Levashov E. A., Head of Department, Doctor of Engineering Sciences

Abstract

The influence of binder composition on the performance of diamond circular saws in cutting reinforced concrete was investigated. Two different approaches were used to improve Fe-based binder to provide high cutting rate and stable wear rate of the tool. The first approach was built upon doping the binder with titanium, a strong carbide-forming component, which allowed producing titanium carbide layer at the diamond–binder interface, thus improving adhesion. The second approach involved complex modification of the binder with nanoparticles of tungsten carbide, hexagonal boron nitride and carbon nanotubes. These dopants improve the mechanical properties of the binders and provide formation of self-assembling protective WC coatings on the diamond surface. To confirm the benefits of binder modification, we tested diamond circular saws equipped with designed binders in cutting reinforced concrete. The tools with basic binder had the lowest cutting speed, higher wear rate and dulling during the test. The modification by addition of titanium allows this problem to be partially solved due to better diamond fixation in the working layer. The complex modification of the binder with nanoparticles demonstrated the best results as it changed its wear mechanism as well as enhanced its mechanical properties. The simultaneous strengthening with WC particles and carbon nanotubes and provoking of wear of binder microvolumes by boron nitride made it possible to maintain high cutting speed and stabilize the tool wear during machining.

This work was supported by the Russian Science Foundation, Project No. 17-79-20384.

keywords Diamond, cutting tool, performance, binder, nanoparticles, strengthening, wear
References

1. Li Z. H., Jia P., Li L. Developments of Industrial Diamond Industry in China. Advanced Materials Research. 2009. Vol. 76(78). pp. 678–683.
2. Li G., Rahim M. Z., Pan W. et al. The manufacturing and the application of polycrystalline diamond tools—A comprehensive review. Journal of Manufacturing Processes. 2020. Vol. 56(5). pp. 400–416.
3. Oliveira F. A. C., Anjinho C. A., Coelho A. et al. PM materials selection: The key for improved performance of diamond tools. Metal Powder Report. 2017. Vol. 72, Iss. 5. pp. 339–344.
4. 360 Research Reports. Available at: https://www.360researchreports.com/ (accessed: 18.11.2021).
5. Industry ARC. Available at: https://www.industryarc.com/Report/18526/diamond-tools-market-research-analysis-report.html (accessed: 18.11.2021).
6. Hu H., Chen W., Deng C. et al. Effect of matrix composition on the performance of Fe-based diamond bits for reinforced concrete structure drilling. International Journal of Refractory Metals and Hard Materials. 2021. Vol. 95. DOI: 10.1016/j.ijrmhm.2020.1054197
7. Bulut B., Gunduz O., Baydogan M. et al. Determination of matrix composition for diamond cutting tools according to the hardness and abrasivity properties of rocks to be cut. International Journal of Refractory Metals and Hard Materials. 2021. Vol. 95. DOI: 10.1016/j.ijrmhm.2020.1054668
8. Sokolov E. G. Influence of tin on the structure and hardness of metallic binders of diamond tools fabricated by composition brazing. Russian Journal of Non-Ferrous Metals. 2016. Vol. 57. pp. 633–637.
9. Polushin N. I., Bogatyrev A. V., Laptev A. I. et al. Influence of the matrix composition, structure, and properties on the service life of a diamond drilling tool. Russian Journal of Non-Ferrous Metals. 2017. Vol. 58, No. 2. pp. 174–179.
10. Konstanty J. Powder Metallurgy Diamond Tools. Elsevier. 2005. 152 p. DOI: 10.1016/B978-1-85617-440-4.X5077-9
11. Kumar D., Dwarapudi S., Sista K. S. et al. Iron Powder-Based Metal Matrix for Diamond Cutting Tools: A Review. ISIJ International. 2020. Vol. 60, No. 8. pp. 1571–1576.
12. Konstanty J. Sintered diamond tools: trends, challenges and prospects. Powder Metallurgy. 2013. Vol. 56, Iss. 3. pp. 184–188.

13. Shlyapin S. D., Il’in A. A., Kolachev B. A. et al. Mechanical Alloying of Powders for the Binders of Diamond-Bearing Composite Materials. Proceedings of Universities. Non-Ferrous Metallurgy. 2003. No. 4. pp. 52–53.
14. Smirnov V. M., Shalunov E. P. The Possibilities of Creation and the Prospects of Application of a Binder with the Matrix-Filled Structure “Tin Bronze–Mechanically Alloyed Granules” for Production of Diamond Tools. Materials Today: Proceedings. 2019. Vol. 11. pp. 270–275.
15. Oglezneva S. A., Diamond tools with metastable steel binder for natural stone cutting. Journal of Friction and Wear. 2011. Vol. 32, No. 4. pp. 313–317.
16. Oglezneva S. A., Portalov M. N., Investigation into the kinetics of isothermal sintering of milled and mechanically alloyed iron powders. Russian Journal of Non-Ferrous Metals. 2015. Vol. 56, No. 3. pp. 300–306.
17. Loginov P., Sidorenko D., Bychkova M. et al. Mechanical alloying as an effective way to achieve superior properties of Fe–Co–Ni binder alloy. Metals. 2017. Vol. 7, No. 12. DOI: 10.3390/met7120570
18. Loginov P. A., Sidorenko D. A., Shvyndina N. V. et al. Effect of Ti and TiH2 doping on mechanical and adhesive properties of Fe-Co-Ni binder to diamond in cutting tools. International Journal of Refractory Metals and Hard Materials. 2019. Vol. 79. pp. 69–78.
19. Loginov P. A., Sidorenko D. A., Levashov E. A. et al. Hybrid metallic nanocomposites for extra wear-resistant diamond machining tools. International Journal of Refractory Metals and Hard Materials. 2018. Vol. 71. pp. 36–44.
20. Sidorenko D., Levashov E., Loginov P. et al. Self-assembling WC interfacial layer on diamond grains via gas-phase transport mechanism during sintering of metal matrix composite. Materials and Design. 2016. DOI: 10.1016/J.MATDES.2016.05.088

Full content Performance of diamond circular saws with innovative Fe-based binders
Back