Journals →  CIS Iron and Steel Review →  2022 →  #2 →  Back

Preparation of raw materials
ArticleName Influence of the conditions of internal heat exchange on the process of thermal decomposition of carbonates in iron ore raw materials
DOI 10.17580/cisisr.2022.02.01
ArticleAuthor V. I. Bobkov, M. I. Dli, Y. B. Rubin
ArticleAuthorData

Smolensk Branch of the National Research University “Moscow Power Engineering Institute” (Smolensk, Russia):

V. I. Bobkov, Dr. Eng., Associate Prof., Head of the Dept. of Higher Mathematics, e-mail: vovabobkoff@mail.ru
M. I. Dli, Dr. Eng., Prof., Head of the Dept. of Information Technologies in Economics and Management, e-mail: midli@mail.ru

 

Moscow University for Industry and Finance “Sinergy” (Moscow, Russia):
Yu. B. Rubin, Dr. Econ., Head of theDept. of Theory and Practice of Competition

Abstract

This work considers influence of heating rate of iron ore raw materials on chemical and metallurgical processes of thermal dissociation of carbonates, which occur during its high-temperature roasting. The research was conducted for the temperature ranges of the existing roasting and sintering machines, taking into account macro-kinetics of calcination processes. Substantial influence of heating rate of iron ore samples on kinetics of thermal decomposition of carbonates was revealed. The cause of the effect of internal heat exchange conditions in reacting iron ore sample on macro-kinetics of dissociation reaction for carbonates was substantiated scientifically. Influence of nonisothermal properties on precision of thermal analytical investigations, which were conducted using the methods of non-isothermal kinetics with different heating rates of iron ore samples, was studied. The authors suggested the mathematical model, which allows to take into account wide range of variations of the parameters in kinetic equations and volumetric thermal and chemical-metallurgical dissociation processes for carbonates. A series of calculating experiments, aimed on reveal of the relationship between heating rate of iron ore samples and evolution of concentration fields, transformation rates and temperature gradients, was carried out using the suggested model. The obtained results can be used for development of the optimal operating conditions for sintering and roasting machines, which propose optimization of heat treatment processes for iron ore preparation, owing to intensification of heat and mass exchange processes during high-temperature roasting. These conditions are considered as optimal from the point of view of power- and resource efficiency. Forming of the above-mentioned conditions allows to decrease fuel and power expenses for thermal preparation of raw materials at metallurgical production facilities, as well as to lower total economical production charges due to use of thermal decomposition of carbonates.

The reported study was funded by RSF according to the research project № 22-11-00335.

keywords Iron ore raw materials, iron ore concentration, roasting, dissociation of carbonates, temperature, heat exchange, calcination
References

1. Li, J., An H.-F., Liu, W.-X., Yang A.-M., Chu M.-S. Effect of basicity on metallurgical properties of magnesium fluxed pellets. Journal of Iron and Steel Research International. 2020. Vol. 27. No. 3. pp. 239-247.
2. Bobkov V. I., Dli M. I., Sokolov A. M., Rubin Y. B. Analysis of chemical-metallurgical agglomeration processes during charge sintering. CIS Iron and Steel Review. 2020. Vol. 20. pp. 7–11.
3. Kavchenkov V. P., Kavchenkova E. V., Chernenkov I. D. Modeling of the relationship between the earth population growth and the electric energy production processes. Journal of Applied Informatics. 2021. Vol. 16. No. 4 (94). pp. 110-121. DOI: 10.37791/2687-0649-2021-16-4-110-121.
4. Wang S., Guo Y., Zheng F., Chen F., Yang L. Improvement of roasting and metallurgical properties of fluorine-bearing iron concentrate pellets. Powder Technology. 2020. Vol. 376. pp. 126-135.2.
5. Guro V. P., Yusupov F. M., Safarov E. T., Rakhmatkarieva F. G. The choice of optimal binder for molybdenite concentrate granulation. Tsvetnye metally. 2016. No. 2. pp. 68-73.

6. Nayak D., Ray N., Dash N., Pati S., De P.S. Induration aspects of low-grade ilmenite pellets: Optimization of oxidation parameters and characterization for direct reduction application. Powder Technology. 2021. Vol. 380. pp. 408-420.
7. Meshalkin V. P., Bobkov V. I., Dli M. I., Fedulov A. S. Mathematical simulation of chemical and energotechnological processes and procedures of coke fines burning in agglomerated layer. CIS Iron and Steel Review. 2020. Vol. 19. pp. 13–17.
8. Wang L., Liu W., Hu J., Xie H., Li C. Indirect mineral carbonation of titanium-bearing blast furnace slag coupled with recovery of TiO2 and Al2O3. Chinese Journal of Chemical Engineering. 2018. Vol. 26. No. 3, pp. 583-592.
9. Bokovikov B. A., Bragin V. V., Shvydkii V. S. Role of the thermalinertia zone in conveyer roasting machines. Steel in Translation. 2014. Vol. 44. No. 8. pp. 595–601.
10. Tian H., Pan J., Zhu D., Wang D., Xue Y. Utilization of Ground Sinter Feed for Oxidized Pellet Production and Its Effect on Pellet Consolidation and Metallurgical Properties. Minerals, Metals and Materials Series. 11th International Symposium on High-Temperature Metallurgical Processing. 2020. pp. 857-866.
11. Matkarimov S. T., Berdiyarov B. T., Yusupkhodjayev A. A. Technological parameters of the process of producing metallized iron concentrates from poor raw material. International Journal of Innovative Technology and Exploring Engineering. 2019. Vol. 8. No. 11. pp. 600-603.
12. Bragin V. V., Bokovikov B. A., Naidich M. I., Gruzdev A. I., Shvydkii V. S. Relation between the productivity and fuel consumption in roasting machines. Steel in Translation. 2014. Vol. 44. No. 8. pp. 590–594.
13. Akberdin A. A., Kim A. S., Sultangaziev R. B. Experiment Planning in the Simulation of Industrial Processes. Steel in Translation. 2018. Vol. 48. No. 9. pp. 573–577.
14. Dli M. I., Vlasova E. A., Sokolov A. M., Morgunova E. V. Creation of a chemical-technological system digital twin using the Python language. Journal of Applied Informatics. 2021. Vol. 16. No. 1 (91). pp. 22-31. DOI: 10.37791/2687-0649-2021-16-1-22-31.
15. Novichikhin A. V., Shorokhova A. V. Procedures for stage processing of iron-ore wastes in industrial mining areas. Izvestiya Ferrous Metallurgy. 2017. Vol. 60. No. 7. pp. 565–572.
16. Yang C.-C., Zhu D.-Q., Pan J., Zhou B.-Z., Xun H. Oxidation and Induration Characteristics of Pellets Made from Western Australian Ultrafine Magnetite Concentrates and Its Utilization Strategy. Journal of Iron and Steel Research International. 2017. Vol. 23. No. 9. pp. 924-932.
17. Pancnehko S. V., Bobkov V. I., Fedulov A. S., Chernovalova M. V. Mathematical modelling of thermal and physical-chemical processes during sintering. Non-Ferrous Metals. 2018. No. 2. pp. 50-55. DOI: 10.17580/nfm.2018.02.09.
18. Meshalkin V. P., Khodchenko S. M., Bobkov V. I., Dli M. I. Computer modeling of the chemical-power engineering process of roasting of a moving multilayer mass of phosphorite pellets. Doklady Chemistry. 2017. Vol. 477. No. 2. pp. 282-285.
19. Dli M. I., Bobkov V. I., Kulyasov N. S., Sokolov A. M. Features of research of iron ore pellets decarbonization kinetics during roasting. CIS Iron and Steel Review. 2021. Vol. 22. pp. 4-8.
20. Yuryev B. P., Goltsev V. A. Change of equivalent layer porosity of pellets along the length of burning conveyor machine. Izvestiya Ferrous Metallurgy. 2017. Vol. 60. No. 2. pp. 116–123.
21. Shvydkii V. S., Yaroshenko Y. G., Spirin N. A., Lavrov V. V. Modeling of metalized pellets firing with the account of physicochemical transformations in them. Izvestiya Ferrous Metallurgy. 2018. Vol. 61. No. 4. pp. 288–293.
22. Tian Y., Qin G., Zhang Y., Zhao L., Yang T. Experimental research on pellet production with boron-containing concentrate. Characterization of Minerals, Metals, and Materials. 2020. pp. 91-102.
23. Zhuravlev F. M., Lyalyuk V. P., Tarakanov A. K., Chuprinov E. V., Kassim D. A. Metallurgical characteristics of unfluxed pellets produced from concentrates with different mineral content. Steel in Translation. 2016. Vol. 46. No. 6. pp. 419-427.
24. Shvydkii V. S., Fatkhutdinov A. R., Devyatykh E. A., Devyatykh T. O., Spirin N. A. On mathematical modeling of layer metallurgical furnaces and aggregates. Report 2. Izvestiya Ferrous Metallurgy. 2017. Vol. 60. No. 1. pp. 19–23.
25. Yaroshenko Y. G. Thermal physics as the basis for energy and resource conservation in steelmaking. Steel in Translation. 2017. Vol. 47. No. 8. pp. 505-516.

Full content Influence of the conditions of internal heat exchange on the process of thermal decomposition of carbonates in iron ore raw materials
Back