Journals →  Tsvetnye Metally →  2023 →  #2 →  Back

FOLLOWING THE RESULTS OF THE V INTERNATIONAL SYMPOSIUM REE-2022 ON SEPTEMBER 16–18, 2022
ArticleName Structure and properties of TiO2 – SiO2 – Ag/fiberglass materials designed for photocatalytic treatment of air
DOI 10.17580/tsm.2023.02.05
ArticleAuthor Buzaev A. A., Lyutova E. S., Tkachuk V. A., Borilo L. P.
ArticleAuthorData

Faculty of Chemistry, National Research Tomsk State University, Tomsk, Russia:

A. A. Buzaev, Assistant Lecturer at the Department of Inorganic Chemistry, Candidate of Chemical Sciences, e-mail: buzaev92@icloud.com
E. S. Lyutova, Associate Professor at the Department of Inorganic Chemistry, Candidate of Technical Sciences
V. A. Tkachuk, Master’s Student at the Department of Inorganic Chemistry
L. P. Borilo, Professor at the Department of Inorganic Chemistry, Doctor of Technical Sciences

Abstract

This paper examines the TiO2 – SiO2 – Ag/fiberglass materials that have been synthesized and that are capable of decomposing organic substances absorbed on the surface when exposed to visible light. The paper looks at the composition, as well as optical and texture properties of the synthesized materials. They are represented by a photocatalytic composite TiO2 – SiO2 – Ag film built on the surface of a fiberglass carrier. In the course of thermal analysis, the authors established the effect of temperature on the TiO2 – SiO2 – Ag film and defined an optimum heat treatment regime. The effect of silicon oxide and silver additions to TiO2 – SiO2 – Ag films was established. When the temperature rises to 600 oC, the thermal stability of the anatase phase of titanium dioxide rises. At the same time, the optical properties deteriorate, the film thickness decreases to 23.92 ± 1.24 nm, refraction index – to 2.154 ± 0.002, band gap energy — to 2.8 ± 0.5; and the light absorption shifts into the visible region, which is of relevance when dealing with photocatalysis problems. The authors looked at the p-xylol photooxidation under 440 nm light to understand the photocatalytic activity of the materials. The maximum efficiency of the material in the p-xylol oxidation reaction is reached at a polluted air feed rate of 0.8 to 1.6 m/sec and a p-xylol concentration of 25 mg/m3. A 93 to 98% conversion degree is reached under the above conditions. The obtained TiO2 – SiO2 – Ag/fiberglass material has a combination of properties that makes it potentially useful as a filtering/absorbing material for studying photocatalytic air treatment processes.
This research was carried out under the Tomsk State University Development Programme Priority-2030 using the following original equipment: A Framework of Experimental Bases Situated along the Latitudinal Gradient, owned by TSU.
The research was funded by the Ministry of Education and Science of Russia; RF-2296.61321Х0043, 13.УНУ.21.00 05, Agreement No. 075-15-2021-672.

keywords Titanium dioxide, silicon dioxide, silver, synthesis, sol-gel method, films, fiberglass, composite
References

1. Budarina O. V., Pinigin M. A., Fedotova L. A., Sabirova Z. F., Shipulina Z. V. Substantiating the single maximum allowable concentration of volatile organic compounds generated in urban air during high-temperature treatment of wood for wood chipboards. Toksikologicheskiy vestnik. 2017. No. 6. pp. 42–47.
2. Bp’s Statistical Review of World Energy 2021. Available at: https://www.bp.com/en/global/corporate/energyeconomics/statistical-review-of-worldenergy.html (Accessed: 12.01.2023).
3. Leshchuk S. I., Surkova I. V., Senkevich N. V. A relationship between industry-caused pollution and the disease rate among population in polluted areas. Izvestiya vuzov. Severo-Kavkazskii Region. Natural Science. 2017. No. 2. pp. 110–117.
4. Vershinin N. N., Balikhin I. L., Berestenko V. I., Efimov O. N., Kabachkov E. N. et al. Synthesis and properties of a carbon monoxode oxidation catalyst based on plasma-chemical titanium carbonitride, titanium dioxide, and palladium. High Energy Chemistry. 2021. Vol. 55, Iss. 1. pp. 75–79.
5. Muscetta M., Russo D. Photocatalytic applications in wastewater and air treatment: a patent review. Catalysts. 2021. Vol. 11, Iss. 7. p. 834.
6. Kubiak A., Bielan Z., Bartkowiak A., Gabala E., Piasacki A. et al. Synthesis of titanium dioxide via surfactant-assisted microwave method for photocatalytic and dye-sensitized solar cells applications. Catalysts. 2020. Vol. 10. p. 586.
7. Al-Madanat O., Curti M., Gunnemann C., Alsalka Y. TiO2 photocatalysis: Impact of the platinum loading method on reductive and oxidative half-reactions. Catalysis Today. 2021. Vol. 380. pp. 3–15.
8. Bukhtiyarov A. V., Prosvirin I. P., Bukhtiyarov V. I. XPS/STM study of model bimetallic Pd – Au/HOPG catalysts. Applied Surface Science. 2016. Vol. 367. pp. 214–221.
9. Buzaev A. A., Zharkova V. V. Production of stable titanium dioxide sols for photocatalytic applications. Prospects of Basic Sciences: Proceedings of the 18th International Conference among Undergraduates, Postgraduates and Young Researchers. 27–30 April 2021, Tomsk. Vol. 2. 2021. Chemistry. pp. 47–49.
10. Mor G. K., Varghese O. K., Paulose M., Mukherjee N., Grimes C. A. Fabrication of tapered, conical-shaped titania nanotubes. Journal of Materials Research. 2003. Vol. 18. pp. 2588–2593.
11. Šuligoja A., Štangara U. L., Ristic A., Mazaj M., Verhovšek D. et al. TiO2 – SiO2 films from organic-free colloidal TiO2 anatase nanoparticles as photocatalyst for removal of volatile organic compounds from indoor air. Applied Catalysis B: Environmental. 2016. Vol. 184. pp. 119–131.
12. Gaidau C., Petica A., Ignal M., Madalina L. Preparation of silica doped titania nanoparticles with thermal stability and photocatalytic properties and their application for leather surface functionalization. Arabian Journal of Chemistry. 2016. Vol. 10. pp. 985–1000.
13. Yanagida S., Hirayama K., Iwasaki K., Yasumori A. Adsorption and photocatalytic decomposition of gaseous 2-propanol using TiO2-coated porous glass fiber cloth. Catalysts. 2019. Vol. 9. p. 82.
14. Brichkov A. S., Shamsutdinova A. N., Khalipova O. S., Rogacheva A. O., Larina T. V. et al. Preparation of a fiberglass-supported Ni – Si – Ti oxide catalyst for oxidation of hydrocarbons: effect of SiO2. Journal of Chemical Technology and Biotechnology. 2019. Vol. 94. pp. 3618–3624.
15. Panasyugin A. S., Lomonosov V. A., Smorygo O. L. Treatment of emissions generated as the result of using nitrogen-containing molding sands by catalyst adsorption method. Lite i Metallurgiya. 2014. Vol. 2. pp. 26–29.

Language of full-text russian
Full content Buy
Back