Журналы →  Eurasian Mining →  2023 →  №1 →  Назад

EQUIPMENT AND MATERIALS
Название Modeling heating of faulty roller of belt conveyor in the presence of coal dust
DOI 10.17580/em.2023.01.14
Автор Malashkina V. A., Shaportov A. V.
Информация об авторе

National University of Science and Technology—NUST MISIS, Moscow, Russia:

Malashkina V. A., Professor, Doctor of Engineering Sciences, promecolodgy@mail.ru
Shaportov A. V., Post-Graduate Student

Реферат

Belt conveyor is a common means of transport in underground mines. At the same time, longwalls equipped with belt conveyors face high fire risk. One of the fire causes on belt conveyors is the seizure of rollers and their friction on the loaded belt in the long flight regions. The modern detectors of fire on belt conveyors fail to ensure ultra early sensing of inflammation. This article describes modeling of heating of a faulty roller in friction with a moving conveyor belt with a layer of coal dust. The modeling has found the rate of heating of the belt conveyor roller up to the temperature of the ultra early fire development with inflammation of coal dust particles, and the degree of effect of the coal dust layer on the fire onset speed. The graphic chart is plotted for the heat balance of a belt conveyor roller in friction-induced heating.

Ключевые слова Coal mine, ore mine, belt conveyor, roller, conveyor belt, exogenous fire, ultra early fire stage, fire initiation signs, heat transfer
Библиографический список

1. Trufanova I. S., Serzhan S. L. Improving transportation efficiency belt conveyor with intermediate drive. Journal of Mining Institute. 2019. Vol. 237. pp. 331–335.

2. Yurchenko V. M. On the problem of fire safety of belt conveyors. GIAB. 2016. No. 2. pp. 134–144.
3. Azbel M. D. Multifunctional automated air and gas control in coal mines : Thesis of Dissertation of Doctor of Engineering Sciences. Kemerovo : FGUP Nauchnyi centr po bezopasnosti rabot v ugolnoy promyshlennosti, 2002. 42 p.
4. Grudachev A. Ya., Mishchenko T. P. Study of the support roller heating process in an emergency mode of belt conveyor operation. Vestnik Donetsk National Technical University. 2019. No. 1(15). pp. 26–31.
5. Barros-Daza M. J., Luxbacher K. D., Lattimer B. Y., Hodges J. L. Mine conveyor belt fire classification. Journal of Fire Sciences. 2021. Vol. 40, Iss. 1. pp. 44–69.
6. Chamorro J., Vallejo L., Maynard C., Guevara S., Solorio J. A. et al. Health monitoring of a conveyor belt system using machine vision and real-time sensor data. CIRP Journal of Manufacturing Science and Technology. 2021. Vol. 38. pp. 38–50.
7. Furukawa O. Fire detection of belt conveyor using random forest. IEEJ Transactions on Fundamentals and Materials. 2021. Vol. 141, No. 9. pp. 508–513.
8. Lisakov S., Sidorenko A., Sypin E. Research on adaptation of multicriterial electro-optical system under object in the form of belt roadway of coal mine for fire control. XXII International Conference of Young Specialists on Micro/Nanotechnologies and Electron Devices. 2021. pp. 287–295. DOI: 10.1109/EDM52169.2021.9507631
9. Ray S. K., Khan A. M., Mohalik N. K., Mishra D., Varma N. K. et al. Methodology in early detection of conveyor belt fire in coal transportation. Energy Sources, Part A: Recovery, Utilization and Environmental Effects. 2020. pp 1–19. DOI: 10.1080/15567036.2020.1823527
10. Shaportov A. V. Analysis of industrial safety and causes of fires on conveyor belts in ore and coal mines. GIAB. 2020. No. S1. pp. 57–65.
11. Saydulin E. G., Rukin M. V., Shelemba I. S., Vozhakov I. S., Cheverda V. V. Automatic detection of faulty conveyor belt rollers using TOREX fibre optic thermal sensor. Gornaya promyshlennost. 2020. No. 4. pp. 54–57.
12. Vyaltsev A. V., Frolov A. V. Probabilistic approach to estimation procedure of fire risk in friction in slip of drive drum of belt conveyor. GIAB. 2009. No. S12. pp. 125–128.
13. Hoff H. Using distributed fibre optic sensors for detecting fires and hot rollers on conveyor belts. 2nd International Conference for Fibre-Optic and Photonic Sensors for Industrial and Safety Applications (OFSIS). Australia : IEEE, 2017. pp. 70–76. DOI: 10.1109/OFSIS.2017.9
14. Litton C. D., Perera I. E. Evaluation of criteria for the detection of fires in underground conveyor belt haulageways. Fire Safety Journal. 2012. Vol. 51. pp. 110–119.
15. Danilov V. M., Erofeev A. V., Gorokhov T. I. Capabilities of software package ANSYS in solution of basic and applied problems in construction. Molodye uchenye–razvitiyu Natsionalnoi tekhnologicheskoi initsiativy (POISK). 2021. No. 1. pp. 182–185.
16. Mersha T. K., Du C. Co-simulation and modeling of PMSM based on ANSYS software and SIMULINK for EVs. World Electric Vehicle Journal. 2022. Vol. 13, Iss. 1. DOI: 10.3390/wevj13010004
17. Korneev S. V., Dolgikh V. P. Structuring of computer model of load–conveyor belt—rollers in software ANSYS Workbench. Collection of Research Papers of the National Mining University. 2014. Vol. 45. pp. 105–111.
18. Breki A. D., Chulkin S. G., Gvozdev A. E., Kolmakov A. G. A generalized mathematical model of external sliding friction in solids. Inorganic Materials: Applied Research. 2022. No. 13. pp. 967–971. DOI: 10.1134/S2075113322040062
19. Taylor R. I. Rough surface contact modelling : A review. Lubricants. 2022. Vol. 10, Iss. 5. DOI: 10.3390/lubricants10050098
20. Mikhailenko S. A., Sheremet M. A. Convection in a differentially heated cubic cavity rolling about horizontal axis. International Journal of Thermal Sciences. 2022. Vol. 179. pp. 3–15. DOI: 10.1016/j.ijthermalsci.2022.107639
21. Richter C., Fessel K., Katterfeld A., Chumachenko Y. Application scenario of the internet of things at the example of overheated roller in belt conveyors. Logistics Journal. 2019. DOI: 10.2195/lj_Proc_richter_de_201912_01
22. Jaber S. B., Hamilton A., Xu Y., Kartal M. E., Gadegaard N. et al. Friction of flat and micropatterned interfaces with nanoscale roughness. Tribology International. 2021. Vol. 153. DOI: 10.1016/j.triboint.2020.106563
23. Izmailov V. V., Novoselova M. V. Influence of temperature and temperature prehistory on frictional characteristics of metal friction pairs. Journal of Friction and Wear. 2021. Vol. 41. pp. 497–501.
24. Amosov A. P. Elemental thermal models of friction. Izvestiya Samarskogo nauchnogo tsentra Rossiyskoi akademii nauk. 2011. Vol. 13, No. 4-3. pp. 656–662.
25. Xiao Y., Chen L., Zhang X., Ren, S., Li D. Controlling fire of belt conveyor and ventilation network calculation in underground coal mines. Conference Series: Earth and Environmental Science. 2018. No. 189. DOI: 10.1088/1755-1315/189/4/042028
26. Tolkachev O., Klychko A., Dickenstein I. The heat exchange of the drive drum and full slipped conveyor belt. Vestnik Instituta grazhdanskoy zaschity Donbassa. 2015. No. 1. pp. 62–66.
27. Shaportov A. V. Fire protection systems on conveyor transport in mines. GIAB. 2022. No. 7. pp. 68–78.
28. Artamonov V. S., Polyakov A. S., Ivanov A. N. Ultraearly and early fire detection: terms, limits of use and unity. Fire and Explosion Safety. 2016. Vol. 25, No. 9. pp. 78–83.
29. Mansurov R. Sh., Voskoboinikov Yu. E., Boeva V. A. Heat transient processes identification of the elements of internal environment system. Vestnik MGSU. 2022. Vol. 17, No 2. pp. 222–231.
30. Shaimerdenova K. M., Schrager E. R., Tussypbaeva A. S., Nausharban Zh. K. Investigation of heat exchange processes in vertically arranged heat exchangers. Bulletin of the Karaganda University. Physics Series. 2019. No. 2(94). pp. 66–72.
31. Novoselov S. V., Popov V. B., Golik A. S. Risk assessment of endogenous fires in coal mines. Ugol. 2020. No. 5(1130). pp. 21–25.
32. Igishev V. G., Shlapakov P. A., Haimin S. A., Sin S. A. Fire indicator gases liberation at coal oxidation at the stage of self-heating and flameless combustion. Bulletin of Research Center for Safety in Coal Industry (Industrial Safety). 2015. No. 4. pp. 55–59.
33. Ushanova S. E., Ziborova E. Yu. Increasing the durability of friction units for mining equipment and conveyor transport. GIAB. 2020. No. S5. pp. 3–8.
34. Dmitrieva V. V., Sizin P. E. Reliability evaluation of belt conveyor line at different redundancies of carrying rollers. GIAB. 2021. No. 7. pp. 85–95.
35. Balovtsev S. V., Vorobyeva O. V. Multifunctional systems of industrial safety in coal mining industry. GIAB. 2020. No. S1. pp. 31–38.

Полный текст статьи Modeling heating of faulty roller of belt conveyor in the presence of coal dust
Назад