Journals →  Chernye Metally →  2023 →  #8 →  Back

Production of Pipes
ArticleName Unification of calibrations of work rolls of the TRA 159–426 piercing mill at rolling of large-diameter continuously cast billets
DOI 10.17580/chm.2023.08.02
ArticleAuthor V. Y. Tsyutsyura, A. G. Ulyanov, A.V. Niklyaev, S. I. Blagoveshchensky
ArticleAuthorData

JSC Volzhsky Pipe Plant, Volzhsky, Russia:

V. Yu. Tsyutsyura, Cand. Eng., Leading Process Engineer, Pipe Rolling Laboratory, Central Plant Laboratory (CPL), e-mail: tsyutsyura.vladimir@gmail.com
A. G. Ulyanov, Head of the CPL Pipe Rolling Laboratory, e-mail: speedy85@mail.ru
A. V. Niklyaev, Head of PRS-3 for Production – First Deputy Head of Pipe Rolling Shop No. 3, e-mail: niklyaev@mail.ru
S. I. Blagoveshchensky, Head of Pipe Rolling Shop No. 3

 

M. M. Orlov and A. I. Shutko took part in this work.

Abstract

Research works to determine rational diameter of piercing mill rolls, tools calibration, and deformation schedule during billet piercing and its influence on pipe quality are still actual and important due to development of gas and oil industry of our country. Crisis of 2021-2022 years caused by pandemic made slow global process of supply and transportation. As a result, prices went up and shortage of different goods happened all over the world. It also changed the structure of world consumption. In this connection, the following questions became significant for MPM 16¾” screw rolling piercing mill: how to increase the rolls operation period and how to decrease the number of used rolls. At present, it takes about 4 hours for changing the rolls from one caliber to another one. The roll supports, which are the universal equipment, are also involved in fulfillment of the work. The enterprises of Public Joint Stock Company “TMK” take part in a program of increasing of operation efficiency to make optimization of the resources used for production. The engineers of Volzhskiy Pipe Plant offered a project which foreseen the improvement of production process and the reduction of rolls pass designs. Adjustment parameters, which allowed to reduce the number of working rolls pass designs from 3 to 2, were successfully tested and integrated during research work taking into consideration technical capabilities of MPM 16¾” screw rolling piercing mill. All necessary calculations were done, and the technological ability to use working rolls of diameter less than 1050 mm was confirmed by testing. This made it possible to successfully roll 17.5 thousand tons of pipes in the period from January to February 2023.

keywords Piercing, continuously cast billet, screw rolling mill, working rolls pass design, hotrolled tubes
References

1. Emelyanenko P. Т. Theory of skew and pilgrim rolling. Moscow: Metallurgizdat, 1949. 491 p.
2. Potapov I. N., Polukhin P. I. Screw rolling technology. 2nd edition, revised and additional. Moscow : Metallurgiya, 1990. 344 p.
3. Romanenko V. P., Sizov D. V. Computer simulation of the process of helical rolling of large billets in a two-roll mill. Izvestiya vuzov. Chernaya metallurgiya. 2010. No. 11. pp. 13–16.
4. Romanenko V. P., Sizov D. V. Simulation of the process of screw piercing of large-diameter billets in a two-roll mill using the finite element method. Izvestiya vuzov. Chernaya metallurgiya. 2011. No. 3. pp. 36–40.
5. Vavilkin N. М. Quantitative assessment of conditions for axial fracture formation during helical rolling. Chernye Metally. 2022. No. 2. pp. 19–22.
6. Toporov V. А., Stepanov А. I., Tolmachev V. S., Panasenko О. А., Ibragimov P. А. Improvement of the technology for production of shells on the JSC STZ`s piercing mill. Chernaya metallurgiya. Byulleten nauchno-tekhnicheskoy i ekonomicheskoy informatsii. 2013. No. 7. pp. 41–46.
7. Toporov V. А., Pyankov B. G., Panasenko О. А., Bogatov А. А., Nukhov D. Sh. Research and implementation of the production process of thin-walled shells on the PJSC STZ`s piercing mill. Stal. 2017. No. 5. pp. 34–47.
8. Korsakov А. А., Mikhalkin D. V., Sherkunov V. G., Niklyaev А. V., Ulyanov А. G. Investigation of the dependence of the shells and pipes quality on the nature of wear and pulling capacity of piercing mill rolls. Proizvodstvo prokata. 2016. No. 1. pp. 39–43.
9. Romantsev B. А., Aleshchenko А. S., Tsyutsyura V. Yu., Lube I. I. Features of wear of work rolls of the PRP 159–426 piercing mill during the rolling of large-diameter continuously cast billets. Proizvodstvo prokata. 2016. No. 6. pp. 20–26.
10. Danilov F. А., Gleyberg А. Z., Balakin G. V. Hot rolling and extrusion of pipes. Moscow: Metallurgiya, 1972. 591 p.
11. Galkin S. P., Gamin Yu. V., Aleshchenko А. S., Romantsev B. А. Modern development of elements of theory, technology and mini-mills of radial-shear rolling. Chernye Metally. 2021. No. 12. pp. 51–58.
12. Mikhalkin D. V., Korsakov А. А., Panasenko О. А., Pyankov К. P. Parameters of the deformation zone and boundary conditions of the piercing process. Metallurg. 2021. No. 2. pp. 19–26.
13. Lube I. I. Research and improvement of the technology of hot rolling of pipes from continuously cast billets on units with a continuous mill : Dissertation … of Candidate of Engineering Sciences. Moscow, 2010. 147 p.

Language of full-text russian
Full content Buy
Back