Journals →  Chernye Metally →  2024 →  #6 →  Back

Gennady Gun's scientific school: to his 85th anniversary
ArticleName Development of the theory of joint plastic deformation of different metals during steel strip rolling
DOI 10.17580/chm.2024.06.01
ArticleAuthor M. A. Polyakova, E. M. Golubchik, E. V. Lopatina, N. A. Trubnikov
ArticleAuthorData

Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia

M. A. Polyakova, Dr. Eng., Associate Prof., Prof., Dept. of Materials Processing Technologies, e-mail: m.polyakova@magtu.ru
E. M. Golubchik, Dr. Eng., Associate Prof., Prof., Dept. of Materials Processing Technologies, e-mail: e.golubchik@magtu.ru
E. V. Lopatina, Postgraduate Student, Dept. of Materials Processing Technologies, e-mail: lopatina.yekaterina2016@yandex.ru
N. A. Trubnikov, Master’s Student, Dept. of Materials Processing Technologies, e-mail: nik.trubnikov.2001@mail.ru

Abstract

The contribution of G. S. Gun to solve scientific and practical problems related to the processes of production of metal products for various purposes is noted. A distinctive feature of his activities was the creation of scientific groups, which included famous scientists and young researchers. This guaranteed the successful achievement of the required result. The basis of this approach to the organization of scientific activity was the long-term traditions of the department of rolling and drawing production headed by G. E. Arkulis. The article proposes to use the basic principles of the theory of joint plastic deformation of dissimilar bodies in relation to pressure treatment processes of multiphase steels. A distinctive feature of the proposed approach is that it takes into account the type and quantitative ratio of the phases that make up the steel structure. To take into account the share of a particular phase in the total volume of the material, it is proposed to use the concept of “phase filling factor”. The hot rolling process of 09G2С steel was chosen as an example. The types and quantitative ratios of phases, as well as their properties at controlled hot rolling temperatures, were obtained using JMatPro software. The calculations performed showed good convergence of the results of the obtained analytical equations with the production modes of hot rolling of this steel. The developed approach can be used to develop technological regimes for pressure treatment of multiphase steels in the absence of statistical data on the features of changes in their structural-phase state.

keywords Theory of Joint plastic deformation of dissimilar bodies, hot rolling, multiphase steel, phase composition, thermokinetic calculation, mechanical properties, rolling modes
References

1. Chukin M. V., Polyakova M. A. Milestones in the formation of the chair for Rolling and Drawing Production of Nosov Magnitogorsk State Technical University. Chernye Metally. 2023. No. 5. pp. 22–30.
2. Arkulis G. E. Joint plastic deformation of different metals. Moscow : Metallurgiya. 1964. 268 p.
3. Arkulis G. E., Dorogobid V. G. Theory of plasticity. Moscow : Metallurgiya. 1987. 351 p.
4. Arkulis G. E., Kuprin M. I. On the paths of development of progressive research. Theory and practice of hardware production: interuniversity collection. Sverdlovsk : UPI publication, 1988. pp. 3–5.
5. Zasukha P. F., Korschikov V. D., Bukhvalov O. B. Bimetallic rolled products. Moscow : Metallurgiya. 1970. 264 pp.
6. Smushkevich L. E. Approximation of the solution to the problem of bimetal pressing. Theory and practice of hardware production: interuniversity collection. Sverdlovsk : UPI publication, 1977. pp. 149–156.
7. Denisov P. I., Polyakov M. G., Nekit V. A., Chernov N. K., Murinova. T. A. Unevenness of layerby-layer deformations during strip cladding of the base with soft metal. Theory and practice of hardware production: interuniversity collection. Sverdlovsk : UPI publication, 1978. pp. 67–70.
8. Kalchenko A. A., Bukhinik G. V. Obtaining metallic adhesion between the components of a bimetallic steel-aluminum billet. Theory and practice of hardware production: interuniversity collection. Sverdlovsk : UPI publication, 1980. pp. 45–50.
9. Bukhinik G. V., Manchash R. I., Krylov A. I., Kurban V. V., Rybakov Yu. A. Study of the quality of steel-copper wire in the production process. Theory and practice of hardware production: interuniversity collection. Sverdlovsk : UPI publication, 1982. pp. 10–15.
10. Atkins A. G., Weinstein A. S. The deformation of sandwich materials. International Journal of Mechanical Sciences. 1970. Vol. 12, Iss. 7. pp. 641–657.
11. Mori K.-I., Bay N., Fratini L., Micari F., Tekkaya A. E. Joining by plastic deformation. CIRPS Annals – Manufacturing Technology. 2013. Vol. 62, Iss. 2. pp. 673–694.
12. Gladkovskii S. V., Trunina T. A., Kokovikhin E. A., Smirnova S. V. et al. Structural steel-aluminum sandwich composites based on low-carbon steel 006/IF. Metal Science and Heat Treatment. 2013. Vol. 55. pp. 3–7. DOI: 10.1007/s11041-013-9569-9
13. Akdesir M., Zhou D., Foadian F., Palkowski H. Study of different surface pre-treatment methods on bonding strength of multilayer aluminum alloys/steel clad material. International Journal of Engineering Research & Science. 2016. Vol. 2, Iss. 1. pp. 169–177.
14. Salikhyanov D. Contact mechanism between dissimilar materials under plastic deformation. Comptes Rendus Mécanique. 2019. Vol. 347, Iss. 8. pp. 588–600.
15. Poletskov P. P., Gulin A. E., Emaleeva D. G., Kuznetsova A. S. et al. Analysis of current research areas in the field of production of multifunctional materials for extreme operating conditions. Vestnik Magnitogorskogo gosudarstvennogo tekhnicheskogo universiteta imeni G. I. Nosova. 2021. Vol. 19. No. 3. pp. 109–114.
16. Chikishev D. N., Golubchik E. M., Tarasova K. A. Study of the influence of chemical composition on mechanical properties of two-phase steel NST780Kh for the purpose of economical alloying. Stal. 2021. No. 12. pp. 46, 47.
17. Kokovikhin Yu. I., Nikulin A. V. Features of plastic deformations of heterogeneous media. Theory and practice of processing of composite and solid materials. Magnitogorsk : MGMI publication, 1993. pp. 32–35.
18. Arkulis G. E. Identification of patterns of uniform joint deformation of dissimilar metals. Izvestiya vuzov. Chernaya metallurgiya. 1960. No. 3. pp. 30–36.
19. Arkulis G. E., Boyarshinov M. I. Conditions for uniform deformation during joint upsetting of dissimilar metals in the absence of external friction. Izvestiya vuzov. Chernaya metallurgiya. 1960. No. 1. pp. 121–123.
20. JMatPro. Practical software for material properties. Available at: www.sentesoftware.co.uk (accessed: 03.03.2024).
21. Schille J., Guo Z., Saunders N., Miodownik A. Modeling phase transformations and material properties critical to processing simulation of steels. Materials and Manufacturing Processes. 2011. Vol. 26. pp. 137–143.
22. Saunders N., Guo Z., Li X., Miodownik A. P., Schillé J.-Ph. Using JMatPro to model materials properties and behavior. JOM. 2003. Vol. 55, Iss. 12. pp. 60–65.
23. Fedoseeva E. M., Olshanskaya T. V. Thermokinetic calculation of the phase composition of welds of aluminum alloy 1420 of the Al-Mg-Li system. Part 1. Thermokinetic calculation of the phase composition of alloy 1420. Vestnik PNIPU. Mashinostroenie, materialovedenie. 2020. Vol. 22, No. 4. pp. 48–55.
24. Egorova Yu. B., Davydenko L. V., Chibisova E. V., Chelpanov A. V. Prediction of mechanical properties of VT6 titanium alloy rods with different types of structure. Tekhnologiya legkikh splavov. 2022. No. 3. pp. 30–40.

Language of full-text russian
Full content Buy
Back