Nizhny Novgorod State Technical University named after. R. E. Alekseev, Nizhny Novgorod, Russia

A. A. Khlybov, Dr. Eng., Prof., Dept. of Materials Science, Materials Technologies and Heat Treatment of Metals, e-mail: hlybov_52@mail.ru

Vyksa Steel Works, Vyksa, Russia
E. L. Vorozheva, Chief Specialist, Cand. Eng., e-mail: vorozheva_el@vsw.ru
K. S. Smetanin, Chief Specialist, e-mail: smetanin_ks@vsw.ru
O. S. Khlybov, Cand. Eng., Expert, e-mail: hlybov_os@vsw.ru

The integrated application of methods of quantitative metallography and mathematical modeling makes it possible to study the patterns of structure formation when varying the technological parameters of rolled steel production. Using the example of niobium microalloyed steel, the application of results of quantitative metallography in mathematical modeling of the microsegregations formation during solidification and cooling of slabs in a continuous casting line is shown. Based on actual and calculated data, the influence of microsegregations on the microstructure formation of rolled products in the combined process of casting and hot rolling, a feature of which is the absence of cooling and heating stages of slabs, is shown. It has been established that during the δ→γ transformation in low-carbon microalloyed steel, microchemical heterogeneity of niobium is formed in the cast structure. It has been determined that one of the factors influencing the formation of heterogeneous prior austenite grains in rolled products is microsegregation. Calculations and experiments have confirmed that increasing the temperature of a continuously cast slab makes it possible to reduce the proportion of niobium carbonitrides precipitated in the slab. The results of the research, introduced into the technology, provided rolled products made of low-carbon microalloyed niobium steel with a thickness of 7–8 mm with impact strength indicators of more than 250 J/cm2 up to a test temperature of –60 °C on longitudinal samples. The shear area fraction is also at a stable and extremely high level of 100 %.

1. Efron L. I. Metal science in the “big” metallurgy. Pipe steels. Moscow : Metallurgizdat, 2012. 696 p.
2. Muntin A. V. Advanced technologies for the combined process of continuous casting of thin slabs and hot rolling. Metallurg. 2018. No. 9. pp. 43–51.
3. Nastich S. Yu. Development of technology for thermomechanical processing of rolled steel of K56-K60 strength class in 2000 mill conditions. Problemy chernoy metallurgii i materialovedeniya. 2012. No. 1. pp. 40–53.
4. Irvine K. J., Pickering F. B., Gladman J. J. Controlled rolling of structural steel. JISI. 1970. Vol. 208. No. 8. pp. 717–726.
5. Tanaka T. et al. Three stages of controlled rolling process. Microalloying’75. Proc. Intern. Symp. Union Carbide Corp. N.Y., 1977. pp. 88–99.
6. Kozasu I., Shimidzu T. Recrystallization of austenite of Si-Mn steels with minor alloying elements after hot rolling. Transactions of the Iron and Steel Institute of Japan. 1971. Vol. 11, Iss. 16. pp. 367–376.
7. Anastasiadi G. P., Kondratyev S. Yu., Silnikov M. V. The role of thermokinetic diagrams of supercooled austenite decomposition in the development of structural steels. Nauchnotekhnicheskie vedomosti Sankt-Peterburgskogo gosudarstvennogo politekhnicheskogo universiteta. 2016. No. 2 (243). pp. 99–113. DOI: 10.5862/JEST.243.11
8. Khlybov A. A., Vorozheva E. L. Influence of the initial cast structure on the quality of hot-rolled products of hypoeutectoid steel. Vestnik Magnitogorskogo gosudarstvennogo tekhnicheskogo universiteta imeni G. I. Nosova. 2021. Vol. 19. No. 1. pp. 48–59. DOI: 10.18503/1995-2732-2021-19-1-48-59
9. Vorozheva E. L., Kudashov D. V., Khlybov A. A., Smetanin K. S. Methods for studying the structural state of continuously cast slabs and hot-rolled metal produced at the casting and rolling complex. Metally. 2022. No. 3 pp. 40–48.
10. GOST 9454–78. Metals. Method for testing the impact strength at low, room and high temperatures. Introduced: 01.01.1979.
11. Chunlian Yan, Xinhua Ju, Yang Meng, Xuexing Shi. Quantifcation of manganese dendritic segregation in 380CL steel billet by electron probe microanalysis. Discover Applied Sciences. 2019. Vol. 1. 623. DOI: 10.1007/s42452-019-0612-3
12. Babachenko O. I., Dyomina K. G., Kononenko G. A., Safronov O. L., Klinova O. P. Effect of cooling rate during solidification of a continuously cast billet on dendritic structure characteristics of OS grade steel. Metaloznavstvo ta Obrobka Metalìv. 2021. Vol. 27 (97). pp. 9–19.
13. Won Y. M., Thomas B. Simple model of microsegregation during solidification of steels. Metallurgical and Materials Transactions A. 2001. Vol. 32A, Iss. 7. pp. 1755–1767.
14. Microsegregation during solidification. Thermo-Calc Software. Available at: https://thermocalc.com/content/uploads/Application_Examples/Microsegregation_Solidification/analysis-ofmicrosegregation-during-solidification.pdf (accessed: 13.01.2023).
15. Golosienko S. A., Ilyin A. V., Lavrentiev A. A. et al. Resistance to brittle fracture of high-strength medium-alloy steel and its relationship with structural state parameters. Voprosy materialovedeniya. 2019. No. 3 (99). pp. 128–147. DOI: 10.22349/1994-6716-2019-99-3-128-147
16. Ilyin A. V., Lavrentiev A. A., Mizetsky A. V. On formulation of a local brittle fracture criterion for predicting the crack resistance of high-strength steel. Voprosy materialovedeniya. 2020. No. 3 (103). pp. 114–134. DOI: 10.22349/1994-6716-2020-103-3-114-134