Satbayev University (Almaty, Republic of Kazakhstan)

Askarova G. E., Doctoral Student, g.askarova@satbayev.university
Mamyrbayeva K. K., Associate Professor, PhD in Engineering Sciences, k.mamyrbayeva@satbayev.university
Shautenov M. R., Professor, Candidate of Engineering Sciences, Associate Professor, m.shautenov@satbayev.university
Mambetalieva A. R., Senior Lecturer

As high-grade gold-bearing ore reserves rapidly become depleted, there is a growing shift towards processing lower-grade refractory ores. These ores contain gold that is finely dispersed, making it more challenging to extract. Gravity beneficiation is a common initial processing method used for these ores. However, due to the extremely small size of the gold particles, significant amounts of gold are lost during this process. This study explores methods to improve gravity beneficiation of refractory gold-bearing ores from the Vasilkovskoye deposit. Physicochemical and particle size distribution analyses have shown that gold particles in the ore samples are very small, ranging from 0.01 mm to 0.074 mm in size. Most of these particles are either dust-like or flaky and are smaller than 0.074 mm. In order to optimize the recovery of fine particles of heavy native gold and gold-bearing minerals, the design of the centrifugal hydroconcentrator was refined and a closed-cycle multi-stage concentration process was developed, which improved the recovery of gold from the Vasilkovskoye deposit ore to 56.7 %. Comparative concentration experiments for various gold-bearing ores, including tailings and waste from several processing plants, have demonstrated that the newly developed gravity beneficiation technology can improve gold concentration efficiency by a factor of 2.38. This advanced technology enables the almost complete recovery of gold particles up to 0.074 mm in size and improves the recovery of very fine, dust-like, plate-like, and flaky gold particles by approximately 15–20 %. The resulting concentrate grades meet the current requirements of gold plants.

1. Bocharov V. A., Abryutin D. V. Technology of goldbearing ores. Moscow: MISIS, 2011. 419 p.
2. Dominy S. C., O’Connor L., Glass H. J., Xie Y. Geometallurgical study of a gravity recoverable gold orebody. Minerals. 2018. Vol. 8, Iss. 5. DOI: 10.3390/min8050186
3. Koppalkar S., Bouajila A., Gagnon C., Noel G. Understanding the discrepancy between prediction and plant GRG recovery for improving the gold gravity performance. Minerals Engineering. 2011. Vol. 24, Iss. 6. pp. 559–564.
4. Ofori-Sarpong G., Amankwah R. K. Comminution environment and gold particle morphology: Effects on gravity concentration. Minerals Engineering. 2011. Vol. 24, Iss. 6. pp. 590–592.
5. Das A., Sarkar B. Advanced gravity concentration of fine particles: A review. Mineral Processing and Extractive Metallurgy. 2018. Vol. 39, Iss. 6. pp. 359–394.
6. Fedotov P. K., Senchenko A. E., Fedotov K. V., Burdonov A. E. Hydrometallurgical processing of gold-containing ore and its beneficiation products. Metallurgist. 2021. Vol. 65. pp. 214–227.
7. Chen Q., Yang H., Tong L., Niu H., Zhang F., Chen G. Research and application of a Knelson concentrator: A review. Minerals Engineering. 2020. Vol. 152. DOI: 10.1016/j.mineng.2020.106339
8. Nikitenko E. M., Mikhalitsyna T. I., Fomina M. I., Sotskaya O. T. Srednekanskaya dike gold deposit in the northeast of Russia. Obogashchenie Rud. 2021. No. 6. pp. 16–22.
9. Fedotov P. K., Senchenko A. E., Fedotov K. V., Burdonov A. E. The Krasnoyarsk Territory primary and complex gold rebellious ores dressability studies. Obogashchenie Rud. 2017. No. 3. pp. 21–26.
10. Zavyalov S. S., Mamonov R. S. Mixed-type dry pretreatment technology for gold-bearing ore. Gornyi Informatsionno-analiticheskiy Byulleten'. 2021. No. 11–1. pp. 338–345.
11. Rassulov V. A., Nerushchenko E. V. Laser-photometric lump separation of gold-bearing ore. Obogashchenie Rud. 2020. No. 5. pp. 16–22.
12. Fedotov P. K., Senchenko A. E., Fedotov K. V., Burdonov A. E. Analysis of industrial studies of gold ores of a Chukotka deposit. Obogashchenie Rud. 2018. No. 2. pp. 23–29.
13. Abdykirova G. Zh., Kenzhaliev B. K., Koyzhanova A. K., Magomedov D. R. Low-sulfide gold-quartz ore concentration potential study. Obogashchenie Rud. 2020. No. 3. pp. 14–18.
14. Poperechnikova O. U., Kuptsova A. V., Nagaeva S. P. On possible extraction of free gold within grain size –0.8+0 mm by flash flotation of low-sulphide gold-containing ores. Proc. of 29^th International mineral processing congress. 2019. pp. 1599–1609.
15. Nayak A., Jena M. S., Mandre N. R. Application of enhanced gravity separators for fine particle processing: An overview. Journal of Sustainable Metallurgy. 2021. Vol. 7. pp. 315–339.
16. Pelikh V. V., Salov V. M., Burdonov A. E., Lukyanov N. D. Application of Knelson CVD technology for beneficiation of gold-lead ore. Obogashchenie Rud. 2019. No. 1. pp. 3–11.
17. Surimbayev B. N., Kanaly E. S., Bolotova L. S., Shalgymbayev S. T. Assessment of gravity dressability of gold ore — GRG test. Gornye Nauki i Tekhnologii. 2020. Vol. 5, No. 2. pp. 92–103.
18. Rabieh A., Albijanic B., Eksteen J. J. Influence of grinding media and water quality on flotation performance of gold bearing pyrite. Minerals Engineering. 2017. Vol. 112. pp. 68–76.
19. Moosakazemi F., Tavakoli Mohammadi M. R., Mohseni M., Karamoozian M., Zakeri M. Effect of design and operational parameters on particle morphology in ball mills. International Journal of Mineral Processing. 2017. Vol. 165. pp. 41–49.
20. Nie Y., Chen J., Wang Q., Zhang C., Shi C., Zhao J. Use of dry grinding process to increase the leaching of gold from a roasted concentrate containing hematite in the thiosulfate system. Hydrometallurgy. 2021. Vol. 201. DOI: 10.1016/j.hydromet.2021.105582
21. Fullam M., Watson B., Laplante A., Gray S. Gold ore processing. Elsevier, 2016. 991 p.
22. Ni L., Tian J., Song T., Jong Y., Zhao J. Optimizing geometric parameters in hydrocyclones for enhanced separations: A review and perspective. Separation & Purification Reviews. 2019. Vol. 48, Iss. 1. pp. 30–51.