Журналы →  Горный журнал →  2024 →  №11 →  Назад

ОБОРУДОВАНИЕ И МАТЕРИАЛЫ
Название Техника и технологии извлечения прихваченного бурового инструмента при горизонтально направленном бурении
DOI 10.17580/gzh.2024.11.13
Автор Симисинов А. Д., Симисинов Д. И.
Информация об авторе

Уральский государственный горный университет, Екатеринбург, Россия

Симисинов А. Д., студент
Симисинов Д. И., зав. кафедрой, д-р техн. наук, 7sinov@mail.ru

Реферат

Рассмотрены аварийные ситуации при горизонтально направленном бурении скважин. Обосновано применение аварийного инструмента для извлечения бурильной колонны в горизонтальной и наклонной скважинах. Предложена технология извлечения прихваченного бурового инструмента бурением параллельной скважины с последующим освобождением от прихвата. Выбран критерий обеспечения устойчивости при бурении сопряженной скважины в заданном направлении на основе динамического расчета.

Ключевые слова Горизонтально направленное бурение, ликвидация прихвата инструмента, буровой аварийный инструмент, параллельная скважина, сопряженная скважина, режимы бурения
Библиографический список

1. Gao D. Xian B., Bi Y. Integrated design and control technology of liner completion and drilling for horizontal wells. Petroleum Exploration and Development. 2024. Vol. 51, Iss. 4. pp. 1009–1021.
2. Toropov E. S., Toropov V. S., Zemenkov Yu. D., Seroshtanov I. V. Complications in construction of pipe crossings applying horizontal directional drilling. Territoriya “Neftegaz”. 2015. No. 5. pp. 32–37.
3. Toropov S. Yu., Dorofeev S. M., Toropov E. S. Trenchless Pipeline Repair Technologies. Tyumen : Tyumenskiy industrialnyi universitet, 2020. 232 p.
4. Saruev L. A., Shadrina A. V., Saruev A. L., Vasenin S. S., Pakharev A. V. Development prospects for technology and equipment for horizontal directional drilling of ratholes in trenchless pipeline laying. Izvestiya Tomskogo politekhnicheskogo universiteta. Inzhiniring georesursov. 2019. Vol. 330, No. 4. pp. 89–97.
5. Zubenko A. A., Prygov A. N. Methods and systems of parallel oil well drilling. Students’ Scientific Forum : Proceedings of VIII International Students’ Conference. Saratov, 2016.
6. Povalikhin A. S., Bliznyukov V. Yu. Selective control of a drill-pipe casing string when drilling a horizontal well. Stroitelstvo neftyanykh i gazovykh skvazhin na sushe i na more. 2019. No. 5. pp. 5–10.
7. Uoters R. L., Midor E. Method for drilling trajectory control for second well passing close to first well (versions). Patent RF, No. 2515930. Applied: 11.01.2010. Published: 20.05.2014. B ulletin No. 14.
8. Kaks A. F., Pitser R. Device for measuring distance and determining direction between two drilled wells (versions); method for measuring distance and determining direction between two drilled wells; solenoid assembly of device for measuring distance and determining direction between two drilled wells. Patent RF, No. 2468200 РФ. Applied: 01.06.2007. Published: 27.11.2012. Bulletin No. 33.
9. Mansouri V., Khosravanian R., Wood D. A., Aadnøy B. S. Optimizing the separation factor along a directional well trajectory to minimize collision risk. Journal of Petroleum Exploration and Production Technology. 2020. Vol. 10, Iss. 5. pp. 2113–2 125.
10. Yin B., Liu G., Liu C. Directional wells anti-collision technology based on detecting the drill bit vibration signal and its application in field. International Petroleum Exhibition and Conference. Abu Dhabi, 2015. ID SPE-177559-MS.
11. Hanak F. C., Estes R. High speed, continuous single well magnetic ranging. SPE/IADC Drilling Conference and Exhibition. London, 2015. ID SPE-173135-MS
12. Dou X., Liang H., Liu Y. Anticollision method of active magnetic guidance ranging for cluster wells. Mathematical Problems in Engineering. 2018. Vol. 2018. ID 7583425.
13. Grills T. L. Magnetic ranging technologies for drilling steam assisted gravity drainage well pairs and unique well geometries—A comparison of technologies. SPE International Thermal Operations and Heavy Oil Symposium and International Horizontal Well Technology Conference. Calgary, 2002. ID SPE-79005-MS.
14. Diao B., Gao D. A magnet ranging calculation method for steerable drilling in build-up sections of twin parallel horizontal wells. Journal of Natural Gas Science and Engineering. 2015. Vol. 27. pp. 1702–1709.
15. Zhang S., Diao B., Gao D. Numerical simulation and sensitivity analysis of accurate ranging of adjacent wells while drilling. Journal of Petroleum Science and Engineering. 2020. Vol. 195. ID 107536.
16. Bybee K. Downhole well connections by use of rotating-magnetic-ranging-service and single-wire-guidance tool. Journal of Petroleum Technology. 2009. Vol. 61, Iss. 5. pp. 75–82.
17. Diao B., Zhang Y., Gao D., Liu Z. Well trajectory measurement error based on gyro survey. Proceedings of the 5th International Conference on Green Energy and Sustainable Development. 2022. E3S Web of Conferences. 2022. Vol. 358. ID 01008.
18. Kindirenko V. M., Kabetenov T., Lyan V. L., Tsoy G. S. Arrangement for drilling parallel matched holes. Patent SSSR, No. 1532673. Applied: 02.12.1987. Published: 30.12.1989. Bulletin No. 48.
19. Simisinov A. D., Volkov E. V., Simisinov D. I. Justification of emergency tool design for removal of drill string stuck in intentionally deviated wells. MIAB. 2021. No. 11-1. pp. 258–264.
20. Simisinov I. L., Simisinov D. I., Lobanov N. V. et al. Suspended emergency drilling unit for extracting stuck drill string. Patent RF, No. 2662833. Applied: 25.07.2017. Published: 31.07.2018. Bulletin No. 22.
21. Simisinov I. L., Simisinov D. I., Simisinov A. D. et al. Emergency tool for extraction of stuck drill string in inclined-directed well. Patent RF, No. 2720834. Applied: 15.08.2019. Published: 13.05.2020. Bulletin No. 14.

Language of full-text русский
Полный текст статьи Получить
Назад