LC Research Center “Hydrometallurgy”, Saint-Petersburg, Russia
S. I. Lyakh, Chief Engineer, Candidate of Technical Sciences, e-mail: lyakh-s@gidrometall.ru
R. R. Anokhin, Junior Researcher, e-mail: anohin-r@gidrometall.ru
I. V. Fomenko, General Director, Candidate of Technical Sciences, e-mail: fomenko-i@gidrometall.ru

Pokrovskiy POX Hub, JSC Pokrovskiy Rudnik, Blagoveshchensk, Russia.
А. S. Zavalyuev, Managing Director, e-mail: aleksandr.zavaliuev@atlasmining.ru

The laboratory studies results of the atmospheric oxidation of two samples of Russian gold-bearing sulfide concentrates are presented. The results of the concentrates oxidation under atmospheric conditions (up to 100 ^оC) in sulfuric acid (pH < 1) and close to neutral (pH 5) media are presented. The influence of the main parameters of the atmospheric process (concentrate size, duration, solid content in the pulp, pH of the pulp) on the degree of sulfide sulfur oxidation has been established. The conditions have been chosen to ensure the oxidation of up to 15–20% sulfide sulfur in the initial concentrates at this stage in a limited time (no more than 6–8 hours) without additional costs for their preliminary ultrafine grinding. The results of autoclave oxidation (225 ^оC) of residues after atmospheric oxidation are presented. The possibility of intensive and deep oxidation of the remaining sulfide minerals and elemental sulfur (the degree of oxidation of sulfide and elemental sulfur is more than 98–99%) formed under atmospheric conditions is shown. The positive effect of preliminary atmospheric oxidation of sulfide concentrates in sulfuric acid media on the main indicators of subsequent autoclave oxidation (gold extraction, cake yield) has been established. A basic technological scheme for autoclave processing of refractory goldcontaining concentrates is proposed, including their preliminary atmospheric oxidation with the addition of industrial products and technological waste (autoclave solution containing Fe³⁺ ions and H₂SO₄, and waste gas from autoclave containing 80–90% (vol.) of oxygen), which can increase the efficiency and productivity of autoclave enterprises by 10–20% without the cost of the key reagent which is oxygen.

1. Grigorieva V. A., Baudouin A. Ya. Prospects for processing refractory gold sulfide raw materials. Izvestiya vuzov. Tsvetnaya metallurgiya. 2023. No. 6. pp. 22–34. DOI: 10.17073/0021-3438-2023-6-22-34
2. N an X., Cai X., Kong J. Pretreatment process on refractory gold ores with As. ISIJ International. 2014. Vol. 54, Iss. 3. pp. 543–547.
3. Sede lnikova G. V. World practice of processing refractory gold sulfide ores and concentrates. Progressive methods of enrichment and complex processing of natural and man-made mineral raw materials (Plaksin readings – 2014) : Proceedings. Almaty, 16–19 September 2014. 2014. pp. 34–38.
4. Surim bayev B., Akcil A., Bolotova L. S., Shalgymbayev S., Baykonurova A. Processing of refractory gold-bearing sulfide concentrates: A review. Mineral Processing and Extractive Metallurgy Review. 2024. Vol. 45, No. 6. pp. 573–591.
5. Soto-Uri be J. C., Valenzuela-Garcia J. L., Salazar-Campoy M. M., Parga-Torres J. R. et al. Gold extraction from a refractory sulfide concentrate by simultaneous pressure leaching/oxidation. Minerals. 2023. Vol. 13, Iss. 1. 116. DOI: 10.3390/min13010116
6. Barbouchi A., Louarrat M., Mikali M., Barfoud L. et al. Advancements in improving gold recovery from refractory gold ores/concentrates: a review. Canadian Metallurgical Quarterly. 2025. Vol. 64, Iss. 4. pp. 2370–2387.
7. Gordeev D. V. , Petrov G. V., Khasanov A.V., Severinova O. V. Review of modern technologies for processing refractory gold-bearing ores and concentrates using nitric acid. Izvestiya Tomskogo politekhnicheskogo universiteta. Inzhiniring georesursov. 2022. Vol. 333, No. 1. pp. 214–223. DOI: 10.18799/24131830/2022/1/3228
8. Thomas K. G., Pe arson M. S. Pressure oxidation overview. Gold ore processing. Elsevier, 2016. pp. 341–358.
9. Ng W. S., Liu Y. , Wang Q., Chen M. The fate of the arsenic species in the pressure oxidation of refractory gold ores: Practical and modelling aspects. Mineral Processing and Extractive Metallurgy Review. 2023. Vol. 44, Iss. 2.
pp. 155–187.
10. Filyanin G. A., Vo robev-Desyatovskiy N. V. Amursk hydrometallurgical plant is a key element of processing unit of Far Eastern “Polymetal” JSC. Tsvetnye Metally. 2014. No. 6. pp. 29–36.
11. Lyakh S. I., Schneer son Ya. M., Klementyev M. V., Afanasyev A. V., Zavalyuyev A. S. Pokrovsky autoclave-hydrometallurgical complex: technology launch and development. Non-ferrous Metals and Minerals-2019 : Collection of reports of the Eleventh International Congress. Krasnoyarsk, 16–20 September 2019. 2019. pp. 918–927.
12. Ma M., Wang W., Zhang K., Shi Z. Experimental study on the oxidation reaction of coal-pyrite and mineral-pyrite with the participation of Fe (III) and Bacteria under acidic conditions. Energies. 2023. Vol. 16, Iss. 8. 3588. DOI: 10.3390/en16083588
13. Mazumdar A., Goldberg T. , Strauss H. Abiotic oxidation of pyrite by Fe(III) in acidic media and its implifications for sulfur isotope measurements of lattice-bound sulfate in sediments. Chemical Geology. 2008. Vol. 253, Iss. 1–2. pp. 30–37.
14. Svens K. Direct leaching a lternatives for zinc concentrates. Chen T. T. Honorary Symposium on Hydrometallurgy, Electrometallurgy and Aterials Characterization, 1st ed.; W. Shijie, J. E. Dutrizac, M. L. Free, J. Y. Hwang, D. Kim, Eds. 2012. pp. 191–206.
15. Lahtinen L., Takala H., Sve ns K., Jarvinen A., Talonen P. Atmospheric zinc concentrate leaching technology of Outokumpu. Lead & Zinc’05. Proceedings of the International Symposium on Lead and Zinc Processing. Kyoto, Japan, 17–19 October 2005. pp. 803–816.
16. Kazanbaev L. A., Kozlov P. A., Kolesnikov A.V., Kondratyuk A. A., Kuteynikov V. N. On the issue of iron conversion in leaching of zinc sulfide materials under atmospheric conditions. Tsvetnye Metally. 2005. No. 5–6. pp. 20–24.
17. Svens K. Outotec atmospheric zinc concentrate direct leaching process - past, present and future. World of Metallurgy – ERZMETALL. 2010. Vol. 63, No. 3. pp. 136–144.
18. Senchenko A. E., Aksenov A.V., V asiliev A. A., Seredkin Yu.G. Technology of processing refractory gold-containing concentrates based on ultrafine grinding and atmospheric oxidation. Available at: https://www.glencoretechnology.com/.rest/api/v1/documents/f41ccaf1fc4aa33730023f58a7539a30/TECHNOLOGY-FOR-PROCESSING-REFRACTORY-GOLD-CONTAINING-CONCENTRATES-IMPC_TOMS-institute_paper-398-Russian-version-2.pdf
19. Hourn M., Turner D. W. Commercialisation of the Albion process. Proceedings of the ALTA 2012 gold conference. 2012. Vol. 19.
20. Voigt P., Mallah D., Hourn M. Oxy gen mass tran sfer in the Albion ProcessTM: from the laboratory to the plant. Proceedings – European Metallurgical Conference, EMC 2017. Leipzig, 25–28 June 2017. Vol. 1. pp. 71–84.