• Acquire
Hide↑
Journals →  Materialy Elektronnoi Tekhniki →  2010 →  #3 →  Back

Materials science and technology. Dielectrics
ArticleName Effect of Growth Conditions on the Mechanical Properties of Lanthanum – Gallium Tantalate crystals
ArticleAuthor M. V. Weintraub, N. S. Kozlova, M. I. Petrzhik
ArticleAuthorData M. V. Weintraub, e-mail: weinmark@yandex.ru, N. S. Kozlova, kozlova_nina@mail.ru, M. I. Petrzhik (National Research University «MISiS»).
Abstract
The effect of single crystal synthesis conductions on the mechanical properties of Lanthanum – Gallium Tantalate La3Ta0,5Ga5,5O14 (langatate) crystals has been studied. Investigations of anisotropy on different crystal cleaves of langatate and surfaces with different polarity were conducted. The experiment required using the Y-cut samples made from crystals grown in the argon (Ar) and argon with oxygen (Ar + O2) atmospheres and Z-cut samples made from crystals grown in argon with oxygen (Ar + O2 atmosphere).
keywords Langatate, microhardness, hardness, growth atmosphere, sensing indentation, indentation elastic modulus, elastic recovery coefficient.
References
1. Buzanov, O. A. Opticheskie svojstva lantan-gallievogo tantalata v svjazi s uslovijami vyrawivanija i poslerostovoj obrabotki / O. A. Buzanov, E. V. Zabelina, N. S. Kozlova // Kristallografija. - 2007. - Vol. 52, N 4. - P. 690—695.
2. Burkov, V. I. Vlijaniey-obluchenija na opticheskie i mehanicheskie svojstva langasita / V. I. Burkov, Ju. V. Pisarevskij, N. L. Sizova, E. V. Fedotov, B. V. Mill' // Kristallografija. - 2007. - Vol. 52, N 4. - P. 722—725.
3. Tjunina, E. A. Langasit i langatat: sostav, stroenie, svojstva / E. A. Tjunina // Avtoref. diss. ... kand. him. nauk. - M. : MITHT im. M.V. Lomonosova, 2008. - P. 15.
4. Kuz'micheva, G. M. Tochechnye defekty v kristallah langatata / G. M. Kuz'micheva, O. Zaharko, E. A. Tjunina, V. B. Rybakov, I. A. Kaurova, E. N. Domorowina, A. B. Dubovskij // Kristallografija. - 2009. - Vol. 54, N 2. - P. 303—306.
5. Musil, J. Measurement of hardness of superhard films by microindentation / J. Musil, H. Zeman, F. Kunc, J. Vl-ek // Mater. Sci. Eng. A. - 2003. - V. 340. - P. 281—285.
6. Veprek, S. On the reliability of the measurements of mechanical properties of superhard coatings / S. Veprek, S. Mukherjee, H.-D. Mannling, Jianli He. // Ibid. - 2003. - V. 340. - P. 292—297.
7. Zolotarevskij, V. S. Mehanicheskie svojstva metallov / V. S. Zolotarevskij - M. : MISiS, 1998. - 400 p.
8. Hertz, H. R. Uber die Beruhrung fester elastischer Korper / H. R. Hertz // J. fur die reine und angewandte mathematik. - 1882. - N 92. - P. 156—171.
9. Landau, L. Teorija uprugosti / L. Landau, M. Lifshic - M. : Nauka, 1987. - 248 p.
10. GOST 2999-75. Metally i splavy. Metod izmerenija tverdosti po Vikkersu. - M. : Publishing house standartov, 1986.
11. Petrzhik, M. I. Sovremennye metody ocenki mehanicheskih i tribologicheskih svojstv funkcional'nyh poverhnostej / M. I. Petrzhik, D. V. Shtanskij, E. A. Levashov // X International scientific-technic conference «Vysokie tehnologii v promyshlennosti Rossii»; XVI International symposium «Tonkie plenki v jelektronike».
12. Oliver, W. C. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments / W. C. Oliver, G. M. Pharr // J. Mater. Res. - 1992. - V. 2. - P. 1564.
13. Glazov, V. M. Mikrotverdost' metallov / V. M. Glazov, V. N. Vigdorovich - M. : Metallurgizdat, 1962. - P. 11—48.
Language of full-text russian
Full content Buy
Back