NANOMATERIALS AND NANOTECHNOLOGY | |
Название | Nanocrystalline electrically conducting additives for low voltage screens of cathodoluminescent displays |
Автор | A. O. Dmitrienko, V. P. Dmitrienko, E. S. Speranskaya, A. P. Loginov, T. A. Akmaeva |
Информация об авторе | A. O. Dmitrienko; V. P. Dmitrienko; E. S. Speranskaya, Saratov State University; A. P. Loginov, FGUP NII Volna; T. A. Akmaeva, Saratov State University. |
Реферат | Low voltage cathodoluminescent screens are fabricated with electrically conducting additives that provide for efficient charge drain under slow electron exposure. ZnO base electrically conducting additives with particle sizes of between 0.1 and 1 μm in quantities of 15—20 wt. % are currently used. The use of nanocrystalline electrically conducting additives (grain size within 50 nm) reduced the requirement to their content in the cathodoluminescent screens from 20 % to 5 % without compromising the electrical conductivity of the screens. Reduction of the nonluminescent component content in the screen increased cathodoluminescence brightness by 30%. We discuss the optimum conditions for the fabrication of nanocrystalline electrically conducting additives and the effect of doping impurity on the electrical conductivity of the additives, and present comparative data on the brightness of screens fabricated with nanocrystalline and standard electrically conducting additives. |
Ключевые слова | Low voltage cathodoluminescence, burning method, nanocrystalline zinc oxide. |
Библиографический список | 1. Hwang, Chyi−Ching Combustion synthesis of nanocrystalline ZnO powders using zinc nitrate and glycine as reactants−influence of reactant composition / Chyi−Ching Hwang, Tsung−Yung Wu // J. Mater. Sci. − 2004. − V. 39. − P. 6111—6115. |
Language of full-text | русский |
Полный текст статьи | Получить |