Журналы →  Gornyi Zhurnal →  2012 →  №9 →  Назад

PROCESSING AND COMPLEX USE OF MINERAL RAW MATERIALS
Название Using the topological method for calculation and analysis of flotation schemes
Автор Samygin V. D., Belyaeva A. V., Severov V. V., Yagudin R. A.
Информация об авторе

National University of Science and Technology “MISiS”, Moscow, Russia:

Samygin V. D., Professor, Doctor of Engineering Sciences, e-mail: visamiguin@yandex.ru

Belyaeva A. V., Candidate for a Master`s Degree

Severov V. V., Leading Engineer, Candidate of Engineering Sciences

 

«Gai» MMC, Gai, Russia:

Yagudin R. A., Deputy Director on Concentration

Реферат

The topological method for calculation and analysis of ore flotation schemes is based on the algorithm of formula development for the extraction operator p, which connects the particular extractions separation processes with the final extraction, which was obtained in the scheme. The algorithm includes the quality-quantitative technological ore flotation schemes in the operational form. According to their topology, there were found the particular analytic dependences. The applicability of the deducible formulas was established for the calculating of extraction operator p, contour transmission l and reverse points C-1, which characterize the circulate loading, as an example of two series for the “copper cap” and basic copper flotation of Uchalinsk Mining and Concentration Complex. These analytical equations are acceptable for the analysis of the operational efficiency dependences of technological schemes on the flotation time in each operation. The economical efficiency of “copper cap” operation and low selectivity of collective flotation operation in the Uchalinsk flotation scheme are shown by the topological method.

This research paper was done with a financial support of a Ministry of Education and Science of Russian Federation. State contract from 12.05.2011, No. 16.515.11.5036.

Ключевые слова Topological method, recovery operator, calculating algorithm, analysis of flotation schemes, optimisation criterion
Библиографический список

1. Razumov K. A., Perov V. A. Proektirovanie obogatitelnykh fabrik (Projecting of the concentration plants). Moscow : Nedra, 1982, 519 p.

2. Shupov L. P. Modelirovanie i raschet na elektronno-vychislitelnoy mashine skhem obogashcheniya (Modeling and calculation of concentration schemes, using the electronic computer). Moscow : Nedra, 1980, 288 p.

3. Rubinshteyn Yu. B., Volkova L. A. Matematicheskie metody v obogashchenii poleznykh iskopaemykh (Mathematical methods in the concentration of mineral resources). Moscow : Nedra, 1987, 296 p.

4. Tsypin E. F., Morozov Yu. P., Kozin V. Z. Modelirovanie obogatitelnykh protsessov i skhem (Modeling of concentration processes and schemes). Ekaterinburg : Ural State Mining University Publ., 1996, 368 p.

5. Kozin V. Z. Issledovanie rud na obogatimost : uchebnoe posobie (Research of ores for concentrating : tutorial). Ekaterinburg : Ural State Mining University Publ., 2009, 380 p.

6. Boyarinov A. I., Kafarov V. V. Metody optimizatsii v khimicheskoy tekhnologii (Optimization methods in the chemical technology). Second edition. Moscow : Khimiya, 1975, 576 p.

7. Samygin V. D., Filippov L. O., Shekhirev D. V. Osnovy obogashcheniya rud: uchebnoe posobie dlya vuzov (Basis of concentration : tutorial for universities). Moscow : Alteks, 2003, 304 p.

8. Barskiy L. A., Danilchenko L. M. Obogatimost mineralnykh kompleksov (Concentrability of mineral complexes). Moscow : Nedra, 1977, 240 p.

Language of full-text русский
Полный текст статьи Получить
Назад