Журналы →  Tsvetnye Metally →  2021 →  №5

Tsvetnye Metally

The focus of the May issue is on some theoretical and practical problems faced by the concentration industry. A special note should be given to a collection of articles that look at new-generation pneumatic column flotation cells and at new approaches to design solutions when using olutions could be applied for similar products of other industries.
The Noble Metals and Alloys section features a lead cake processing diagram. If implemented, such process can yield silver-bearing concentrate and lead cake of commercial quality. The former can be used to produce high value added products.
Of interest is the article published in the Metals Processing section that examines titanium alloys, which is a rare subject in recent technical literature.
The Automation section contains an article that looks at the optimized process of drying titanium pellets in a tunnel kiln.
Last February, professor Anatoliy Sysoev, Tsvetnye Metally’s editor-in-chief, passed away. He was basically the one who would define the journal’s strategy. One of the sections in the current issue is devoted to the memory of professor Sysoev.
The May issue traditionally highlights the great victory over fascist occupants. This year, the cover page features a photo of the sculpture by distinguished artist of Russia Konstantin Chernyavskiy.
Please find more details below, or order your printed or electronic version of the Journal.

Название Design solution for the thin-layer separation effect use of the suspension when washing metal-bearing sand at placer deposits
Авторы Cherkasov V. G., Shumilova L. V.
Информация об авторах

Zabaykalsky State University, Chita, Russia:

V. G. Cherkasov, Professor, Doctor of Technical Sciences, Assistant Professor, e-mail: cherkasov1948@yandex.ru
L. V. Shumilova, Professor, Doctor of Technical Sciences, Assistant Professor

Название Some aspects of modernization of pneumatic flotation machines of a column type
Авторы Viduetsky M. G., Garifulin I. F., Maltsev V. A., Purgin A. P.
Информация об авторах

TDTs "Project Institute", Ural Federal University, Yekaterinburg, Russia:

M. G. Viduetsky, Deputy Director for Science, e-mail: vid.magr@mail.ru
I. F. Garifulin, Chief Specialist
V. A. Maltsev, Director, Doctor of Technical Science
A. P. Purgin, Head of the Technological Department

Название Obtaining ultrafine copper electrolytic dendritic powders
Авторы Agarova N. E., Yakovleva L. M., Timofeev K. L.
Информация об авторах

JSC Uralelectromed, Verkhnyaya Pyshma, Russia:

N. E. Agarova, Leading Engineer-Technologist of the Laboratory for Electroc hemical Production of the Research Center, e-mail: N.Agarova@elem.ru
L. M. Yakovleva, Head of the Laboratory for Electrochemical Production of the Research Center, e-mail: L.Yakovleva@elem.ru


JSC Uralelectromed, Verkhnyaya Pyshma, Russia1 ; UMMC Technical University, Verkhnyaya Pyshma, Russia2:
K. L. Timofeev, Head of the Technical Department of Engineering and Production Management1, Associate Professor of the Сhair for Metallurgy2, Candidate of Теchnical Sciences

Название Extraction of silver in processing of dust from the firing of nickel concentrate in fluidized bed furnaces
Авторы Areshina N. S., Kasikov A. G., Tyukin D. P., Volchek K. M.
Информация об авторах

Tananaev Institute of Chemistry – Subdivision of the Federal Research Centre "Kola Science Center of the Russian Academy of Sciences" Science Center of Russian Academy of Sciences (ICT KST RAS), Apatity, Russia:

N. S. Areshina, Senior Researcher, Candidate of Technical Sciences, e-mail: n.areshina@ksc.ru
A. G. Kasikov, Yead of the Laboratory for Development and Implementation of Chemical Technology Processes, Candidate of Chemical Sciences


Kola MMC, Monchegorsk, Russia:
D. P. Tyukin, Chief Specialist of the Technical Department of Technical Management
K. M. Volchek, Chief Specialist of the Hydrometallurgical Department of the Research Section of the Control and Analytical Center

Название Vanadium (V) extraction in systems with quaternary ammonium salts
Авторы Fleitlikh I. Yu., Kulmuchamedov G. K., Grigorieva N. A.
Информация об авторах

Institute of Chemistry and Chemical Technology SB RAS, Federal Research Center “Krasnoyarsk Science Center SB RAS”, Krasnoyarsk, Russia:

I. Yu. Fleitlikh, Lead Researcher
N. A. Grigorieva, Senior Researcher, Сandidate of Сhemical Sciences, e-mail: natasha@icct.ru


Northern Katpar LLC, Karaganda, Kazakhstan:

G. K. Kulmuchamedov, Lead Specialist

Название Obtaining and electronic emission of planar structures of metallic copper on a porous ceramic substrate
Авторы Pak V. N., Lapatin N. A., Pronin V. P., Yachmenova L. A.
Информация об авторах

Research Institute of Physics, Herzen State Pedagogical University of Russia, St. Petersburg, Russia:

V. N. Pak, Chief Researcher, Doctor of Chemical Sciences, Professor
N. A. Lapatin, Researcher, Candidate of Chemical Sciences, e-mail: nicoljapat@mail.ru
V. P. Pronin, Professor of the Chair for Theoretical Physics and Astronomy, Doctor of Physical and Mathematical Sciences


St. Petersburg Mining University, St. Petersburg, Russia:
L. A. Yachmenova, Graduate Student of the Chair for Automation of Technological Processes and Production

Название Influence of copper microalloying components and deformation conditions on the structure and physical and mechanical properties of blanks for collector profiles
Авторы Tolstobrov A. K., Shatalov R. L., Agafonov A. A., Zernova O. A.
Информация об авторах

Moscow Polytechnic University, Moscow, Russia:

R. L. Shatalov, Doctor of Technical Sciences, Professor, e-mail: mmomd@mail.ru


JSC Kirov plant for processing of non-ferrous metals, Kirov, Russia:
A. K. Tolstobrov, Chief Metallurgist, e-mail: tolstobrovak@gmail.com
A. A. Agafonov, Deputy Chief Engineer - Head of Technical Department
O. A. Zernova, Head of the Central factory laboratory

Название Improving physical and mechanical properties of foil for anodes of high-voltage electrolytic capacitors by introducing an intermediate annealing
Авторы Sarkisov T. S., Belov N. A., Sarkisov S. S., Dolbachev A. P.
Информация об авторах

Сhair for Metal Forming, NUST MISiS, Moscow, Russia:

T. S. Sarkisov, Graduate Student
N. A. Belov, Chief Researcher, Doctor of Technical Sciences, Professor, e-mail: nikolay-belov@yandex.ru
S. S. Sarkisov, Leading Project Expert, Candidate of Technical Sciences
A. P. Dolbachev, Graduate Student

Название Experimental evaluation of the curves of maximal ductility and fluidity for titanium alloys in hot torsion testing
Авторы Medvedev M. I., Frolov Ya. V., Andreev A. V., Bobukh A. S.
Информация об авторах

National Metallurgical Academy of Ukraine, Dnipro, Ukraine:

M. I. Medvedev, Senior Researcher, Chair for Metal Forming, Doctor of Тechnical Sciences, e-mail: medvedev@metal-forming.org
Ya. V. Frolov, Professor, Нead of the Сhair for Metal Forming, Doctor of Тechnical Sciences, e-mail: frolov@metal-forming.org

A. S. Bobukh, Associate Professor of the Chair for Metal Forming, Candidate of Тechnical Sciences, e-mail: bobukh@metal-forming.org


INTERTIPE Ukraine Ltd., Dnipro, Ukraine:
A. V. Andreev, Leading Specialist of the Department for Development of New Products and Technologies, Candidate of Тechnical Sciences, e-maill: andreiev@metal-forming.org

Название Influence of shear deformation under pressure at different temperatures on mechanical properties of E125 zirconium alloy
Авторы Rogachev S. O., Nikulin S. A., Khatkevich V. M.
Информация об авторах

Natinal University of Science and Technology MISiS, Moscow, Russia:

S. O. Rogachev, Associate Professor, Candidate of Тесhnical Sciences, e-mail: csaap@mail.ru
S. A. Nikulin, Head of the Chair, Doctor of Тесhnical Sciences, Professor, e-mail: nikulin@misis.ru
V. M. Khatkevich, Chief Engineer, Candidate of Тесhnical Sciences, e-mail: hatvm87@mail.ru

Название To calculation of stresses in drawing of anisotropic viscoplastic material
Авторы Chudin V. N., Chernyaev A. V., Tesakov D. M.
Информация об авторах

FSBEI HE Russian University of Transport (MIIT), Moscow, Russia:

V. N. Chudin, Professor of the Chair for Material Resistance and Structural Mechanics, Doctor of Technical Sciences


FSBEI HE Tula State University, Tula, Russia:

A. V. Chernyaev, Professor of the Chair for Mechanics of Plastic Shaping, Doctor of Technical Sciences, e-mail: sovet01tsu@rambler.ru


JSC KBP named after Academician A. Shipunov, Tula, Russia:

D. M. Tesakov, Design Engineer

Название An optimized process of drying titanium pellets in a tunnel kiln
Авторы Rutkovskiy A. L., Salikhov Z. G., Kovaleva M. A., Bakhteev E. M.
Информация об авторах

North Caucasian Institute of Mining and Metallurgy (State University of Technology), Vladikavkaz, Russia:

A. L. Rutkovskiy, Professor at the Department of Non-Ferrous Metallurgy and Automation of Metallurgical Processes, Doctor of Technical Sciences, e-mail: rutkowski@mail.ru

E. M. Bakhteev, Postgraduate Student at the Department of Non-Ferrous Metallurgy and Automation of Metallurgical Processes


Institute of Control Sciences of the Russian Academy of Sciences, Moscow, Russia:
Z. G. Salikhov, Principal Researcher, Professor, Doctor of Technical Sciences, e-mail: zuf1940@yandex.ru


Vladikavkaz Branch of the Financial University under the Government of the Russian Federation, Vladikavkaz, Russia:
M. A. Kovaleva, Associate Professor at the Department of Mathematics and Computer Science, Candidate of Technical Sciences, e-mail: Mary_kovaleva@list.ru

Журналы →  Tsvetnye Metally →  2021 →  №5