Journals →  Chernye Metally →  2021 →  #12 →  Back

Certification
ArticleName Declaration of conformity in the field of metallurgical production
DOI 10.17580/chm.2021.12.13
ArticleAuthor A. V. Kraev, V. A. Ivanova
ArticleAuthorData

PRONTO Ltd. (Yaroslavl, Russia):

A. V. Kraev, Head of the Technical Control Department, e-mail: alex.kraev@gmail.com

 

Yaroslavl State Technical University (Yaroslavl, Russia):

V. A. Ivanova, Dr. Eng., Associate Professor, Head of the Dept. of Materials Technology, Standardization and Metrology, e-mail: ivanova-waleriya@mail.ru

Abstract

At present, the declaration of conformity in Russia is a priority form of confirmation of the conformity of products to the requirements of technical regulations. Technical regulations are documents containing mandatory requirements for products, methods and forms of assessment, approved by the decision of the Supreme Eurasian Economic Council, acting on the territory of the Eurasian Economic Union and being mandatory for execution and compliance. A list of technical regulations has been established, for compliance with which the declaration of conformity of products in the field of metallurgy is carried out. The sources of risk of the process of declaration of conformity have been identified and their causes have been established. Among these sources are selection of product samples; on-site testing of products, samples or their study as a representative of all subsequently manufactured products; assessment of test (research) results from the standpoint of visibility of product compliance with the requirements of technical regulations; production control; study of a sample for the planned production as a typical representative of a product used at hazardous production facilities; analysis of the technical documentation submitted by the applicant and its preliminary assessment; assessment of the risk of harm when applying the requirements proposed by the applicant; quality management system (QMS) certification. On the basis of risk management, conformity declaration schemes have been established, with the use of which the likelihood of products hazardous to the consumer appearing on the market is greatest - 1D, 3D. The content of the documentation on the applicant’s production control when declaring conformity is proposed - technological equipment, personnel, measuring instruments, documentation (design, technological, registration and accounting), infrastructure (territory, production facilities, transport, etc.), incoming control, special processes (operations), acceptance control and periodic testing, marking of finished products. A list of national standards of the Russian Federation is presented, which make it possible to implement all stages of the declaration of conformity by the applicant.

keywords Declaration of conformity, technical regulations, metallurgy products, source of risk, safety, production control
References

1. Decision of the Council of the Eurasian Economic Commission dated 18.04.2018 No. 44 (as amended on 23.12.2020) “On standard conformity assessment schemes. Available at: https://www.alta.ru/tamdoc/18sr0044/ (accessed: 02.12.2021).
2. Eurasian Economic Commission. Technical regulations of the Customs Union, which entered into force. Available at: http://www.eurasiancommission.org/ru/act/texnreg/deptexreg/tr/Pages/TRVsily.aspx (accessed: 05.08.2021).
3. Bykova N. М. Conformity assessment of food products: declaration or mandatory certification. Standarty i kachestvo. 2019. No. 3. pp. 24–25.
4. Sinyavina L. O. On conformity of dairy products. Features of declaration. Molochnaya sfera. 2016. No. 4(59). pp. 50–53.
5. Pustovgar А. P., Elenova А. А. System of declaration of conformity of building mixtures. Arkhitektura, gradostroitelstvo i dizain. 2020. No. 4 (26). pp. 25–32.
6. Farkhushin L. Declaration of conformity in the field of fire safety. Pozharnoe delo. 2018. No. 11. pp. 42–45.
7. Ivanova V. А., Kraev А. V., Yablonskiy О. P. Analysis of the regulatory and methodological support for the declaration of conformity within the framework of the Customs Union. Sertifikatsiya. 2014. No. 3. pp. 21–26.
8. Melkovskaya Е. А., Pankov К. Yu. Methods for determination of the weighting coefficients of competencies by the method of paired comparisons. Vestnik voennogo obrazovaniya. 2018. No. 2 (11). pp. 83–86.
9. GOST R 54293–2010. Analysis of production state in confirmation of conformity. Introduced: 01.07.2011. Moscow: Izdatelstvo standartov, 2010.
10. Federal Service for Accreditation. Register of accredited persons. Available at: https://pub.fsa.gov.ru/ral (accessed: 05.08.2021).
11. GOST R 56532–2015. Conformity assessment. Recommendations for the adoption of the declaration of product conformity to statutory requirements. Introduced: 01.04.2016. Moscow: Izdatelstvo standartov, 2015.
12. GOST R 58973–2020. Conformity assessment: Rules for preparation of testing protocols. Introduced: 01.07.2021. Moscow: Izdatelstvo standartov, 2020.
13. GOST R 58987–2020. Conformity assessment. Investigation of the type of products for conformity assessment (confirmation) of products to the requirements of technical regulations of the Eurasian Economic Union. Introduced: 01.01.2021. Moscow: Izdatelstvo standartov, 2020.
14. Ivanova V. А., Kraev А. V. Production control when declaring conformity. Kachestvo i zhizn. 2015. No. 4 (8). pp. 69–73.
15. Decision of the Board of the Eurasian Economic Commission dated December 25, 2012 No. 293 “On uniform forms of the certificate of conformity and declaration of conformity with the requirements of technical regulations of the Eurasian Economic Union and the rules for their registration”. Available at: https://www.alta.ru/tamdoc/12kr0293/ (accessed: 02.12.2021).
16. GOST R ISO 31000–2019. Risk management. Principles and guidelines. Introdued: 01.03.2020. Moscow: Izdatelstvo standartov, 2019.
17. Ivanova V. А., Kraev А. V. Study of the declaration of conformity using the functional modeling methodology IDEF0. Directory. Inzhenernyi zhurnal s prilozheniem. 2012. No. 11. pp. 39–43.
18. Kraev А. V., Ivanova V. А. Risk identification when declaring product conformity. Kachestvo i zhizn. 2019. No. 2. pp. 69–73.
19. Eurasian Economic Commission. Registers and classifiers. Available at: http://www.eurasiancommission.org/ru/act/texnreg/deptexreg/tr/Pages/TRVsily.aspx (accessed: 05.08.2021).

Language of full-text russian
Full content Buy
Back