Chernye Metally

 

The June issue of the “Chernye metally” journal is mainly devoted to processes of rolling and heat treatment.

 

In particular, this section presents the publications of TsNIITMASH specialists (on the study of stresses in cast iron rolling rolls), the Moscow Polytechnic University (on the calculation of the parameters for straightening section profiles) and a joint publication of the Volgograd State Technical University and the Tula State University (on the study of heating parameters of billets in chamber furnaces with hot and cold charging).

 

Here is also an article dedicated to the 110th anniversary of the birth of P.I.Polukhin, who made a huge contribution to the development of the scientific school of metal forming of the Moscow Institute of Steel and Alloys.

 

The Pipe production section publishes works on the study of plugs of the helical rolling mill, carried out at the MISiS Metal Forming chair, as well as on the study of resistance of structural steel pipes to hydrogen embrittlement carried out at the Vyksa Metallurgical Plant.

 

Noteworthy is the article in the Preparation of raw materials section, which tells about the effect of antifreeze additives on the freezing capacity of iron ore concentrate of wet magnetic separation.

 

This issue also contains publications in the Metal Science and Metallography, Chemical Technologies, Ecology and Recycling and Engineering Technologies sections.

 

The issue ends with a review of the State diagram of alloys of the system iron - ε-Fe2C carbide monograph by S. V. Davydov, professor of the Bryansk State Technical University.

 

Please find more details below, or order your printed or electronic version of the Journal.

Mineral Processing
ArticleName
ArticleAuthors
V. Yu. Golubev, I. U. Aubakirova, D. A. Panteleev, K. A. Shumilov
ArticleAuthorsData

St. Petersburg State University of Architecture and Civil Engineering (St. Petersburg, Russia):

V. Yu. Golubev, Cand. Eng., Associate Prof., Dept. of Building Materials Technology and Metrology, Technical Director of Polyplast North-West LLC, e-mail: vladimirgolubev@list.ru
I. U. Aubakirova, Cand. Eng., Associate Prof., Dept. of Building Materials Technology and Metrology, e-mail: centeririna@yandex.ru
D. A. Panteleev, Cand. Eng., Associate Prof., Dept. of Building Materials Technology and Metrology, e-mail: dm-pant@yandex.ru
K. A. Shumilov, Cand. Eng., Associate Prof., Dept. of Information Technology, e-mail: shkas56@mail.ru

Rolling and Heat Treatment
ArticleName
ArticleAuthors
E. V. Kovalevich, F. A. Nuraliev, K. L. Kosyrev, N. S. Gushchin
ArticleAuthorsData

RF State Research Centre JSC SPA “CNIITMASH” (Moscow, Russia):

E. V. Kovalevich, Dr. Eng., Prof., Chief Researcher, Lab. of Foundry Processes
F. A. Nuraliev, Cand. Eng., Head of Lab. of Foundry Processes
K. L. Kosyrev, Dr. Eng., Prof., Dep. General Director for Scientific Work, e-mail: klkosyrev@cniitmash.com
N. S. Gushchin, Cand. Eng., Chief Researcher, Lab. of Foundry Processes

ArticleName
ArticleAuthors
E. A. Maksimov, R. L. Shatalov
ArticleAuthorsData

JSC Intray,(Chelyabinsk, Russia):
E. A. Maksimov, Cand. Eng., Technologist, e-mail: maksimov50@mail.ru

 

Moscow Polytechnic University (Moscow, Russia):

R. L. Shatalov, Dr. Eng., Prof., e-mail: mmomd@mail.ru

ArticleName
ArticleAuthors
O. B. Kryuchkov, A. V. Krokhalev, A. A. Belov, P. I. Malenko
ArticleAuthorsData

Volgograd State Technical University (Volgograd, Russia):

O. B. Kryuchkov, Cand. Eng., Associate Prof., Deputy Dean, e-mail: bardb@mail.ru
A. V. Krokhalev, Dr. Eng., Associate Prof., Dean, e-mail: kroch@vstu.ru
A. A. Belov, Senior Lecturer, e-mail: aa-belov@bk.ru

 

Tula State University (Tula, Russia):

P. I. Malenko, Cand. Eng., Associate Prof., e-mail: malenko@tsu.tula.ru

Tubemaking
ArticleName
ArticleAuthors
A. S. Aleshchenko, Nguen Kuang
ArticleAuthorsData

National University of Science and Technology “MISiS” (Moscow, Russia):

A. S. Aleshchenko, Cand. Eng., Associate Prof., Head of Metal Forming Dept., e-mail: judger85@mail.ru
Nguen Kuang, Post-graduate Student, Metal Forming Dept., e-mail: nquang.misis@mail.ru

ArticleName
ArticleAuthors
V. V. Naumenko, A. V. Muntin, E. S. Mursenkov, S. V. Kovtunov
ArticleAuthorsData

Vyksa Steel Works (Vyksa, Russia):
V. V. Naumenko, Cand. Eng., Head of the Dept., e-mail: naumenko_vv@vsw.ru
E. S. Mursenkov, Chief Specialist
S. V. Kovtunov, Specialist

Bauman Moscow State Technical University (Moscow, Russia):

A. V. Muntin, Cand. Eng., Associate Prof.

Metal Science and Metallography
ArticleName
ArticleAuthors
A. Z. Isagulov, Sv. S. Kvon, V. Yu. Kulikov, A. A. Alina
ArticleAuthorsData

Karaganda Technical University (Karaganda, Kazakhstan):

A. Z. Isagulov, Dr. Eng., Executive Director, e-mail: aristotel@kstu.kz
Sv. S. Kvon, Cand. Eng., Prof., Dept. of Nanotechnology and Metallurgy, e-mail: svetlana1311@mail.ru
V. Yu. Kulikov, Cand. Eng., Prof., Dept. of Nanotechnology and Metallurgy, e-mail: mlpikm@mail.ru
A. A. Alina, Doctoral Student, Dept. of Nanotechnology and Metallurgy, e-mail: altynbekovna_21@mail.ru

ArticleName
ArticleAuthors
S. I. Gubenko, E. V. Parusov, O. V. Parusov
ArticleAuthorsData

Iron and Steel Institute of Z. I. Nekrasov NAS of Ukraine (Dnipro, Ukraine):
S. I. Gubenko, Dr. Eng., Prof., e-mail: sigubenko@gmail.com
E. V. Parusov, Cand. Eng., Senior Researcher, Head of Dept.
O. V. Parusov, Cand. Eng., Senior Researcher

Chemical Technologies
ArticleName
ArticleAuthors
I. V. Skvortsova, E. A. Eliseeva, A. I. Karnyushkin, V. S. Boldyrev
ArticleAuthorsData

Omsk State Pedagogical University (Omsk, Russia):
I. V. Skvortsova, Cand. Chem., Associate Prof., Dept. of Chemistry, e-mail: i_dorovskih@mail.ru

 

Bauman Moscow State Technical University (Moscow, Russia):
E. A. Eliseeva, Cand. Chem., Associate Prof., Dept. of Chemistry, e-mail: yakusheva@bmstu.ru
A. I. Karnyushkin, Cand. Chem., Associate Prof., Dept. of Chemistry, e- mail: him_expert@mail.ru
V. S. Boldyrev, Cand. Eng., Associate Prof., Leading Engineer of the Automation and Robotics Engineering
Center, e-mail: boldyrev.v.s@bmstu.ru

Ecology and Recycling
ArticleName
ArticleAuthors
O. V. Golubev, G. V. Torokhov, D. A. Ermakov, P. I. Chernousov
ArticleAuthorsData

National University of Science and Technology “MISiS” (Moscow, Russia):
O. V. Golubev, Cand. Eng., Associate Prof., e-mail: olega-san@yandex.ru
G. V. Torokhov, Cand. Eng., Associate Prof., Head of Dept., e-mail: gvtorohov@gmail.com
D. A. Ermakov, Post-graduate Student, e-mail: ermakov_dmitrii@bk.ru
P. I. Chernousov, Cand. Eng., Associate Prof., e-mail: p.chernou@yandex.ru

ArticleName
ArticleAuthors
S. V. Vashchenko, A. Yu. Khudyakov, K. V. Bayul, Yu. S. Semenov
ArticleAuthorsData

Iron and Steel Institute of Z. I. Nekrasov NAS of Ukraine (Dnipro, Ukraine):

S. V. Vashchenko, Cand. Eng., Senior Researcher, e-mail: sergeyvaschenko.sv@gmail.com
A. Yu. Khudyakov, Cand. Eng., Senior Researcher, e-mail: khudyakovsashko@gmail.com
K. V. Baiul, Cand. Eng., Senior Researcher, e-mail: baiulkonstantin@gmail.com

 

ISD Scientific Technical Company (Dnipro, Ukraine):
Yu. S. Semenov, Cand. Eng., Director, Senior Researcher in the Institute of Ferrous Metallurgy, e-mail: yuriy.semenov.isi@gmail.com

Machine-building technologies
ArticleName
ArticleAuthors
V. D. Kukhar, V. A. Korotkov, S. S. Yakovlev, A. A. Shishkina
ArticleAuthorsData

Tula State University (Tula, Russia):

V. D. Kukhar, Dr. Eng., Prof., Head of the Dept. of Theoretical Mechanics, e-mail: Fiz-site@yandex.ru
V. A. Korotkov, Cand. Eng., Associate Prof.
S. S. Yakovlev, Post-graduate Student
A. A. Shishkina, Student