Journals →  Chernye Metally →  2020 →  #2

Chernye Metally



Steel making and foundry production
ArticleName SALCOS technology for smooth decarburization of steel
ArticleAuthors V. Hille, A. Redenius
ArticleAuthorsData

Salzgitter AG (Salzgitter, Germany):

V. Hille, Dr. Eng., Dipl. Phys., Head of Corporate Technology, e-mail: hille.v@salzgitter-ag.de

 

Salzgitter Mannesmann Forschung GmbH (Salzgitter, Germany):
A. Redenius, Dr. Eng., Head of Resource Effi cience and R&D Dept.

ArticleName Modeling of the valve steel production chain
ArticleAuthors H.-P. Jung, D. Leuverink, U. Grafe, M. Honig, U. Plociennik, M. Reifferscheid
ArticleAuthorsData

Deutsche Edelstahlwerke (Siegen, Germany)

H.-P. Jung, Head of the Process Engineering and ESR
D. Leuverink, Product quality management

 

SMS group GmbH (Düsseldorf, Germany)

U. Grafe, Dr. Eng., Head of Materials Technology
M. Hönig, Dr. Nat. Sci., Dept. for Basics/Modeling of Continuous Casting Process
U. Plociennik, Head of Dept. for Basics/Modeling of Continuous Casting Process, e-mail: uwe.plociennik@sms-group.com
M. Reifferscheid, Dr. Eng., Head of Development Department

ArticleName The raw material base of ferroalloys and features of development of their production in Russia. Part 2. Microalloying ferroalloys
ArticleAuthors G. Yu. Boyarko, B. N. Matveev
ArticleAuthorsData

Tomsk Polytechnic University (Tomsk, Russia):

G. Yu. Boyarko, Dr. Eng., Prof., Natural Resources Engineering School, e-mail: gub@tpu.ru

 

All-Russian Institute of Scientific and Technical Information RAS (Moscow, Russia):
B. N. Matveev, Dr. Eng., Prof, head of Dept. of Scientific Information on Metallurgy, e-mail: bnmatveev@gmail.com

ArticleName Study of the dependence of non-stick coatings properties on the mode of mechanical activation of graphites
ArticleAuthors T. R. Gilmanshina, I. E. Illarionov, N. S. Perfilyeva, E. N. Zhirkov
ArticleAuthorsData

Siberian Federal University (Krasnoyarsk, Ruissia):

T. R. Gilmanshina, Cand Eng., Associate Prof., e-mail: gtr1977@mail.ru
N. S. Perfilyeva, Cand Eng., Associate Prof.

 

I. N. Ulyanov Chuvash State University (Cheboksary, Russia):
I. E. Illarionov, Dr. Eng., Prof, Head of the Dept. “Materials science and metallurgical processes”, e-mail: tmilp@rambler.ru
E. N. Zhirkov, Post-graduate, Dept. “Materials science and metallurgical processes”

Rolling and other Metal forming processes
ArticleName The main trends in the development of production of rolled products, pipes and hardware in 2017–2019. Part 2. Pipe production, metal trading and standardization
ArticleAuthor N. N. Gugis
ArticleAuthorData

“Chermet” Corporation (Moscow, Russia):

N. N. Gugis, President, e-mail: nng@k-chermet.ru

ArticleName Modeling of the stress-strain state of a metal during plastic forming of a sheet blank and welding of large diameter pipes. Report 1
ArticleAuthors A. P. Kolikov, D. Yu. Zvonarev, M. I. Taupek
ArticleAuthorsData

National University of Science and Technology “MISiS” (Moscow, Russia):

A. P. Kolikov, Dr. Eng., Prof., Metal Forming Dept., e-mail: apkolikov@mail.ru

 

All-Russian Scientific and Research Institute of Tube Industry — RosNITI (Chelyabinsk, Russia):
D. Yu. Zvonarev, Cand. Eng., Head of Helical Rolling Lab., e-mail: zvonarev@rosniti.ru

 

Moscow Polytechnic University (Elektrostal, Russia):
I. M. Taupek, Cand. Eng., Associate Prof., Head of Metal Forming Dept. in Elektrostal affiliate

ArticleName Study of the contact interaction of a strip with work rolls during continuous scelping of welded pipes in a TESA line
ArticleAuthors S. V. Samusev, V. A. Fadeev
ArticleAuthorsData

National University of Science and Technology “MISiS” (Moscow, Russia):

S. V. Samusev, Dr. Eng., Prof., Metal Forming Dept.
V. A. Fadeev, Post-graduate, Metal Forming Dept., e-mail: fdv-viktor@mail.ru

ArticleName Study of the eff ect of the 13KhFA steel microstructure on impact toughness of thick-walled seamless pipes
ArticleAuthors V. F. Petrova, A. A. Guseva
ArticleAuthorsData

Volgograd State Technical University (Volgograd, Russia):

V. F. Petrova, Cand. Eng., Associate Prof., “Materials Technology” Dept., e-mail: val.petrova7@mail.ru
A. A. Guseva, Student, “Materials Technology” Dept., e-mail: aguseva20@yandex.ru

ArticleName Determination of the angle of bite during roll briquetting of finely dispersed materials
ArticleAuthors N. A. Babailov, Yu. N. Loginov, L. I. Polyanskiy
ArticleAuthorsData

Institute of Engineering Science, Ural Branch of the Russian Academy of Sciences (Ekaterinburg, Russia):

N. A. Babailov, Cand Eng., Senior Researcher, e-mail: n.ia.babailov@urfu.ru

 

Ural Federal University (Ekaterinburg, Russia):

Yu. N. Loginov, Dr. Eng., Prof., Dept. of Metal Forming

 

“Spaidermash” JSC (Ekaterinburg, Russia):

L. I. Polyanskiy, General Director

Metallurgical Equipment
ArticleName Reengineering of a fan drive of the JSC Ural Steel electric steelmaking workshop
ArticleAuthors N. A. Chichenev, V. S. Shkitov
ArticleAuthorsData

National University of Science and Technology “MISiS” (Moscow, Russia):

N. A. Chichenev, Dr. Eng., Prof., Technological Equipment Engineering Dept., e-mail: chich38@mail.ru

 

Ural Steel (Novotroitsk, Russia):
V. S. Shkitov, Head of Mechanical Shop Section, e-mail: sllim007@mail.ru

ArticleName Vibrodiagnostics system for rolling mill equipment
ArticleAuthors V. Baglay, V. V. Vorobiev, A. N. Guzeev, M. M. Kipin
ArticleAuthorsData

«Diamech-Ukraine» (Kharkov, Ukraine):

A. V. Baglay, Director
M. M. Kipin, specialist in vibration analysis of machines III, e-mail: kipin@diamech.ru

 

Kremenchuk Mykhailo Ostrohradskyi National University (Kremenchug, Ukraine):
V. V. Vorobyov, Dr. Eng., Prof., Engineering Technology Dept.

 

Diamech 2000 Ltd. (Moscow, Russia):
A. N. Guzeev, Chief Engineer

HR Policy
ArticleName Consistently and persistently implementing strategies
ArticleAuthor D. Kudernatsch
ArticleAuthorData

Kudernatsch Consalting Solutions (Strasslach, Germany):

D. Kudernatsch, Dr., Owner of a business consulting company, e-mail: redaktion@stahleisen.de

ArticleName Employee motivation is an important factor in the company`s development
ArticleAuthor M. Schwartz
ArticleAuthorData

Institute for Integral and Labor Practices (Esslingen near Stattgart, Germany):

M. Schwartz, Director, e-mail: redaktion@stahleisen.de

Metallurgical history
ArticleName The study of Georgian damask weapons of the XIX century from the collection of the Mining University`s Mining Museum
ArticleAuthors K. V. Tumanova, V. Yu. Bazhin, O. A. Dubovikov, A. V. Sundurov, V. G. Povarov
ArticleAuthorsData

St. Petersburg Mining University (St. Petersburg, Russia):

K. V. Tumanova, Cand. Eng., Senior Researcher of the Mining museum, e-mail: karinadam@mail.ru
V. Yu. Bazhin, Dr. Eng., Prof., Vice-rector for scientific and innovation activities
O. A. Dubovikov, Dr. Eng., Prof., Chemical Technologies and Energy Processing Dept., e-mail: dubovikov_oa@mail.ru
A. V. Sundurov, Post-graduate, Metallurgical Dept., e-mail: sav.66@bk.ru
V. G. Povarov, Dr. Eng., Head of Analytical Research Dept., Center for Collective Use

Journals →  Chernye Metally →  2020 →  #2